CAMPLEX CMX-FMCH003 4K60 HDMI Over Fiber Extender Set User Manual

CAMPLEX CMX-FMCH003 4K60 HDMI Over Fiber Extender Set

Product Information: CMX-FMCH003 4K60 HDMI over Fiber Extender Set

The CMX-FMCH003 extender set is designed for high-quality 4K AV extension over Single Mode or Multimode fiber (SFP+ dependent) with very minimum latency. The compact size of the units allows for greater flexibility during installation. The product supports all HDMI 2.0 formats including multichannel PCM, Dolby True HD, and DTS HD master audio. It is ideal for A/V extension without RF interference, long-distance data and video transmission, household entertainment, lecture halls, meeting rooms, classrooms, and point-to-point secure video conference.

Specifications

| TX| RX
---|---|---
Interfaces| 1 HDMI (Type A), 1 USB (Mini-B), 1 10GbE LAN (SFP+)| 1 10GbE LAN (SFP+), 1 HDMI (Type A), 1 USB (Mini-B)
Input Signal Types| HDMI 2.0 (DVI 1.0)
Output Signal Types| 4K@60 YUV 4:4:4
Maximum Input| 2.2
Maximum Output| 4K@60 YUV 4:4:4
Audio| HDMI LPCM (8 Channels), Bitstream, High Bit Rate
Bitstream
Power Supply| 5V/2.6A DC (Locking)
Power Consumption| TBD

Features

• Point-To-Point Extension of Audio, Video, and Control Signals
• Supports a Full Range of Formats Including 4K60 RGB/4:4:4, HDR10, 3D and Broadcast-Friendly 4K60 10-Bit 4:2:2
• Extension Up To 30km (SFP+ Module Dependent)
• Supports Single Mode or Multimode Fiber (SFP+ Module Dependent)
• Supports Pass-Through of 10/12-Bit HDR Sources Signal Transmission Interfaces With 10-Gigabit Ethernet Switches Via XFI (IEEE 802.3ae) Compatible 10-Gigabit Ethernet Connector

Package Contents

• 1x UHD HDMI over Fiber Transmitter
• 1x UHD HDMI over Fiber Receiver
• 2x 5V/2.6A DC Power Adapter
• 2x Shockproof Feet (Set of 4)

Note: SFP Modules Sold Separately

System Requirements

• HDMI source equipment such as a media player, video game console, PC or set-top box
• Compatible fiber-based receiver
• IEEE 802.3ae compatible SFP+ fiber module supporting a dual-optical fiber connection style, such as LC, or a pre-terminated crossover dual-optial fiber cable

Operation Controls and Functions

Front Panel:

• Power LED: This LED will illuminate to indicate the unit is on and receiving power
• System LED: This LED will illuminate to indicate that the system is stable and ready to process audio/video streams
• Video LED: This LED will illuminate to indicate that the video source is stable, and streaming is in process
• HDMI IN / OUT Port: Connect source such as media player, game console or set-top box to HDMI in; connect a display or projector to the HDMI out.
• SFP Port: Insert a standard SFP+ module and connect the appropriate optical cable to allow data transmission.

Product Usage Instructions

1. Connect the HDMI source equipment (media player, video game console, PC or set-top box) to the HDMI IN port of the transmitter unit.
2. Connect the HDMI out port of the transmitter unit to the display or projector using an HDMI cable.
3. Insert a standard SFP+ module into the SFP port of both the transmitter and receiver units.
4. Connect the appropriate optical cable to the SFP port of both the transmitter and receiver units.
5. Connect the USB ports of the transmitter and receiver units using a Mini-B USB cable.
6. Connect the 10GbE LAN ports of the transmitter and receiver units using an SFP+ cable or a pre-terminated crossover dual-optial fiber cable.
7. Connect the power adapter to the DC power input of both the transmitter and receiver units.
8. Turn on the HDMI source equipment and the display or projector.
9. The Power LED of both the transmitter and receiver units should illuminate to indicate that the units are receiving power.
10. The System LED of both the transmitter and receiver units should illuminate to indicate that the system is stable and ready to process audio/video streams.
11. The Video LED of both the transmitter and receiver units should illuminate to indicate that the video source is stable, and streaming is in process.
12. The audio and video signals should now be transmitted over the fiber optic cable with very minimum latency.

Product SPECIFICATIONS

TX

RX

INTRODUCTION

The Camplex CMX-FMCH003 extender set is designed for high quality 4K AV extension over Single Mode or Multimode fiber (SFP+ dependent) with very minimum latency. The compact size of the units allows for greater flexibility during installation. Supports all HDMI 2.0 formats including multichannel PCM, Dolby True HD and DTS HD master audio.

APPLICATIONS

• A/V Extension Without RF Interference
• Long Distance Data and Video Transmission
• Household Entertainment, Lecture Halls, Meeting Rooms and Classrooms Point to Point Secure Video Conference

FEATURES

• Point-To-Point Extension of Audio, Video, and Control Signals
• Supports a Full Range of Formats Including 4K60 RGB/4:4:4, HDR10, 3D and Broadcast-Friendly 4K60 10-Bit 4:2:2
• Extension Up To 30km (SFP+ Module Dependent)
• Supports Single Mode or Multimode Fiber (SFP+ Module Dependent)
• Supports Pass-Through of 10/12-Bit HDR Sources
• Signal Transmission Interfaces With 10-Gigabit Ethernet Switches Via XFI (IEEE 802.3ae) Compatible 10-Gigabit Ethernet Connector

PACKAGE CONTENTS

• 1x UHD HDMI over Fiber Transmitter
• 1x UHD HDMI over Fiber Receiver
• 2x 5V/2.6A DC Power Adapter
• 2x Shockproof Feet (Set of 4)
  NOTE: SFP Modules Sold Separately

SYSTEM REQUIREMENTS

• HDMI source equipment such as a media player, video game console, PC or set-top box Compatible fiber-based receiver
  IEEE 802.3ae compatible SFP+ fiber module supporting a dual-optical fiber connection style, such as LC, or a pre-terminated crossover dual-optial fiber cable

Operation Controls and Functions

Front Panel:

1. Power LED: This LED will illuminate to indicate the unit is on and receiving power
2. System LED: This LED will illuminate to indicate that the system is stable and ready to process audio/video streams
3. Video LED: This LED will illuminate to indicate that the video source is stable, and streaming is in process
4. HDMI IN / OUT Port: Connect source such as media player, game console or set-top box to HDMI in; connect a display or projector to the HDMI out.
5. SFP Port: Insert a standard SFP+ module and connect the appropriate optical cable to allow data transmission to a compatible receiver

Rear Panel:

1. Service (USB Mini-B) Port: Factory use only
2. DC 5V Port: Plug the 5V DC power adapter into this port and connect it to an AC wall outlet for power

Connection Diagram

Video Specifications Supported

Supported Resolutions (Hz)
720x400p@70/85
640x480p@60/72/75/85
720x480i@60
720x480p@60
720x576i@50
720x576p@50
800x600p@56/60/72/75/85
848x480p@60
1024x768p@60/70/75/85
1152x864p@75
1280x720p@60
1280x768p@60/75/85
1280x800p@60/75/85
1280x960p@60/85
1280x1024p@60/75/85
1360x768p@60
1366x768p@60
1400x1050p@60
1440x900p@60/75
1600x1200p@60
1680x1050p@60
1920x1080i@50/60
1920x1080p@24/25/30
1920x1080p@50/60
2560x1440p@60RB
2569x1600p@60RB
3840x2160p@24/25/30
3840x2160p@50/60 (4:2:0)
3840x2160p@24 HDR10
3840x2160p@50/60 (4:2:0) HDR10
3840x2160p@50/60
4096x2160p@24/25/30
4096x2160p@50/60 (4:2:0)
4096x2160p@50/60 (4:2:0) HDR10
4096x2160p@50/60

Audio Specifications Supported

Cable Specifications Supported

1080p (FHD Video)

• Up to 1080p@60Hz, 12-bit color
• Data rates lower than 5.3Gbps or below 225MHz TMDS clock

4K@24/25/30Hz &

• 4K@50/60Hz (4:2:0), 8-bit color
• Data rates higher than 5.3Gbps or above 225MHz TMDS clock butbelow 10.2Gbps

4K30 (4K UHD Video)

• 4K@50/60Hz (4:4:4, 8-bit)
• 4K@50/60Hz (4:2:0, 10-bit HDR)
• Data rates higher than 10.2Gbps

812 Kings Highway | Saugerties, NY 12477 | 800-445-7568 | www.camplex.com
100% Employee Owned Division of Tower Products Incorporated

References

• Broadcast Fiber Optic Cable Solutions and Accessories

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>