Ehaho 4FT LED Whip Lights for UTV Installation Guide
- June 15, 2024
- eHAHO
Table of Contents
Ehaho 4FT LED Whip Lights for UTV
Product Information
- Specifications
- LED Whiplights
- 12VDC: 20AMP
- 24VDC: 10AMP
Product Usage Instructions
- Initial Setup
- After receiving your package, please open it and check if the product has been damaged during shipping. Use the accessory list in the instruction manual to ensure that you have received all the necessary parts.
- Contacting Customer Support
- If there are any issues or concerns, please do not hesitate to contact us at our customer support email: support@ehaho.com.
- Music Mode
- The music mode is currently only available for songs that have been downloaded onto your phone.
- Streaming services like Apple Music and Spotify generally do not download songs to your phone. As a solution, you can use the Mic mode so that your lights automatically adjust to the sound of music.
- To use mic mode, follow these steps:
- Click on the mic icon at the bottom right of the screen.
- Click OK to allow the app to access your phone’s microphone.
- Music Dancing Light Pattern
- The music dancing light pattern can be triggered by your phone’s microphone or an external microphone of the product.
- Set the sensitivity to adjust the external mic to sense the external sound frequency and intensity. The lights will sync with the sound’s frequency and intensity.
- One-to-One Remote Control Setting
- To prevent the whiplights from being interfered by other people’s remote controls, it is recommended to set your whiplights to one-to-one remote control mode during the initial installation.
- To enable one-to-one remote control mode:
- Long press the ON button for about 2-3 seconds.
- The whiplights will flash twice, indicating that the whiplights are locked and only controlled by your controller and not affected by others’ remote controllers.
- Note: To avoid pairing your light with a whiplight of the same style, do not enable the one-to-one remote control mode when there are other whiplights of the same style nearby.
- It is possible to choose a different location for setting or make sure other whiplights are turned off before setting.
- Music Activation Mode
- The music activation mode can only be used after adjusting the sensitivity of the external microphone in the Magic Lantern app.
- FAQ
- Q: Can I use the music mode with songs from streaming services like Apple Music or Spotify?
- A: No, the music mode is currently only available for songs that have been downloaded onto your phone. Streaming services generally do not download songs to your phone.
- Q: How do I enable the one-to-one remote control mode?
- A: To enable one-to-one remote control mode, long press the ON button for about 2-3 seconds. The whiplights will flash twice, indicating that they are locked and only controlled by your controller.
- Q: How do I adjust the sensitivity of the external microphone?
- A: You can adjust the sensitivity of the external microphone in the Magic Lantern app.
Includes
- Thank you for purchasing our universal LED RGB Whip.
- After receiving your package, please open it and check if the product has been damaged during shipping.
- Use the accessory list in the instruction manual to ensure that you have received all the necessary parts.
- If there are any issues or concerns, please do not hesitate to contact us at our customer support email: support@ehaho.com.
Perts List
Box comes with (single pc)
Box comes with (combo set)
WARNING
- 1t is recommended that this installation be performed by a licensed professional. The improper installation of this kit will void all warranties.
- PIease read the following instructions thoroughly before installing and operating this led whip.
Step Mount Up
- Remove the bottom nut and the spring washer on the bottom of your quick-release mount.
- Mount the LED WHIP into any openyh%” bolt mount on your vehicle. Make sure the flat washer is inbetween the whip and the mount.
- Place the spring washer underneath the mount and then rescrew the bottom nut.
- Have a pair? Go for round 2 and mount the 2nd whip the same way.
Step2 Get wired!
- Grab your battery cord and connect it to the bottom hanging cord on your LED WHIP.
- Have a pair? Connect the 3-prong plug coming out the side of the master LED WHIP to the plug coming from the slave LED WHIP.
- Note: The slave LED WHIP cannot function without being connected to the master LED WHIP.
- Connect the terminal wire to the Positive(+) and Negative(-) terminals of your vehicle battery.
- Hide any extra wiring with zip ties.
Step3
- Using the flag mounts to secure flag to the whip.
Step4
-
Tips: For better battery protection, please power the cord to the rocker switches first before going to the battery. With any issues, please feel free to contact Ehaho Customer Service and we will address your issue in a timely manner.
-
Wiring method: A
Accessory switching power supply (When the key is turned on, the indicator light below will light up) -
Wiring method B
Constant power supply/battery (The lower indicator light will only come on when the switch is turned to the ON position)
-
Step5
LED WHIP LIGHTAPP GUIDE
- Open the app and click “0K”. Ifyou accidentally click “Don’t allow”, Please go into your phone’s settings and find “Magic-Lantern”. Then, allow Bluetooth through your phone’s settings. This is essential to connect your phone to your lights.
- Turn on your phone’s Bluetooth. Then, plug in and turn on your LED Atmo- sphere Lights. After, click the icon in the top left corner of the app. You should see your lights appear under “My devices” (this may take up to 3 minutes). Click on your lights to finish pairing them with your app.
Music Mode
- Currently music mode is only available for songs that have been downloaded onto your phone.
- Apple Music, Spotify, and other streaming services generally do not down- load songs to your phone.
- As a solution, you can use the “Mic” mode so that your lights automatically adjust to the sound of music.
- To use mic mode, click “mic” in the bottom right of the screen.
- Then, click “0K” to allow the app to access your phone’s mic.
- Music dancing lights pattern can be triggered by your phone’s mic or an external mic of the products.
- Set the sensitivity to adjust the External MIC to sense the external sound of frequency and intensity lights will sync with the sound’s frequency and intensity.
LED WHIP LIGHT LIGHTS
CONTROLLED BY LOTUSUNTERN APP
- Works with APP
- Long-range control convenient and quick
- Brightness control from 1% to 100%
- Seven romantic scene modes are optional
- More Than 16million of Colors
- Multi modes can be controled by one APP
- DIY selection by APP controller to createyour great led mood lighting
REMOTE CONTROLLER
- One-to-one Remote Control Setting
- Long press the ON button about 2-3 seconds, the whip lights flashes twice,which means the whips lights locked and only control by your controller and not affected by others remote controller.
- ln order to prevent the whip lights from being interfered by other people’s remote controls, it is recommended to set your whip lights to one-to-one remote control mode during the initial installation.
- To avoid pairing your light with a whip light of the same style, do not enable the one-to-one remote control mode when there are other whip lights of the same style nearby. it is possible to choose a different location for setting or make sure other whip lights are turned off before setting.
- The music activation mode can be used only after adjusting the sensitivity of the external microphone in the “Magic Lantern” APP.
(Download “Magic-Lantern “from the App Store or Google Play Store.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>