LEVITON ODD10-IDx Smart Dimming Wallbox Sensor Owner’s Manual
- August 25, 2024
- Leviton
Table of Contents
LEVITON ODD10-IDx Smart Dimming Wallbox Sensor
Specifications
- Electrical:
- Input Voltage/Frequency: 120-277VAC, 50/60Hz
- Input Current:
- 120V: Standby: 0.2W, Max: 0.5W + Load Current
- 277V: Standby: 0.3W, Max: 0.6W + Load Current
- Load Ratings:
- General Purpose @ 120V: 10A
- General Purpose @ 277V: 10A
- LED/Electronic Ballast @ 120V: 8A
- LED/Electronic Ballast @ 277V: 5A
- Standard Ballast @ 120V: 10A
- Standard Ballast @ 277V: 6.67A
- Tungsten @ 120V: 6.67A, Tungsten @ 277V: 6.67A
- Motor @ 120V: 1/4HP (FLA 5.8A)
- Motor @ 277V: 1/3HP (FLA 3.0A)
- IP Rating: IP20
- Network Connections: BLE 4.2, BLE 5.0
- Environmental:
- Operating Temperature:
- Storage Temperature:
- Physical Dimensions: 4.13 x 2.12 x 1.86 (104.90mm x 53.95mm x 47.25mm)
- Other:
- Energy Codes: Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24, Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements
- Listings: IECC, UL and cUL listed; JIS Z 2801:2000
- Certifications: FCC, ICC
- Warranty: Limited five-year warranty
Product Usage Instructions
Installation
- Ensure power is turned off before installation.
- Connect the wires according to the wiring diagrams provided.
- Mount the sensor in the desired location following the dimensions diagram
Configuration
To configure the sensor settings:
- Press the button according to the desired operating mode and sensitivity level.
- Follow the instructions in the manual for specific configuration options.
Operation
To operate the sensor:
- Use the ON/OFF button to manually control the sensor.
- The sensor will detect motion within its coverage area and activate the lights accordingly.
Frequently Asked Questions (FAQ)
-
Q: Can the sensor be used without a smart device?
A: Yes, the sensor can be configured and operated using the pushbutton hold configuration method outlined in the manual. -
Q: What is the warranty period for this product?
A: The product comes with a limited five-year warranty from Leviton Manufacturing Co., Inc.
Product Data
ODD10-IDx
Smart PIR 0-10V Dimming Wallbox Sensor
Description
- The Leviton Smart Dimming Wallbox Sensor (ODD10-IDx) is designed for use with 0-10V ballasts and uses Passive Infrared (PIR) detection technology to monitor a room for occupancy using a segmented, tamper resistant lens. A specialized lens divides the field-of-view into sensor zones. When a person passes in or out of a sensor zone the sensor detects motion and switches the lights ON.
- The lights will remain ON as long as an occupant moves through the sensor zones and after the timeout expires. The ODD10-IDx features a vacancy mode for Manual-ON/Auto-OFF operation, ideal for installations where manual-ON switching is required for energy code applications. Lighting levels can be adjusted using the dimming bar next to the switch.
- A “minor motion” zone detects small body movements. This detection allows the lights to remain ON when individuals in the space are more stationary. The “major motion” zone exhibits a lesser degree of sensitivity requiring larger movements.
- Configuration of ODD10-IDx is made using the Leviton Smart Sensor App from a smartphone or other Bluetooth® enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several common pre-configured options. The ODD10-IDx integrates a photocell for daylighting hold-OFF which can be programmed using the Leviton Smart Sensor App.
Applications
- Office
- Small Lobbies
- Meeting Rooms
Features
- Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24, Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements
- Fits in a standard wallbox and gangable with other units
- Use the Leviton Push to Pair (P2P) process to create a multi-way system for up to 5 devices
- Controls LED lighting loads up to 8A
- One relay module for single-level switching
- 180° field-of-view provides approximately 1,100 square feet of coverage Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side
- Latest PIR technology accurately detects minor motion up to 400sq ft and major motion up to 1,100 sq ft
- Integrated photocell for daylighting hold-OFF
- Add a Power Pack and Controlled Receptacles for plug load control
- Available models with antimicrobial treated plastic helps keep the device clean
- Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth enabled Android or iOS device:
- Set operating mode to Occupancy (auto-ON/auto-OFF) or Vacancy (manual-ON/auto-OFF)
- Adjust sensitivity and timeouts
- Set up partial-ON and partial-OFF levels and partial-OFF timeouts
- Enable the integrated photocell for daylighting hold-OFF and select target daylighting hold-OFF levels
- Activate the nightlight and select nightlight colors
- Set a security code to lock configuration settings
- Out-of-the-box configuration default mode:
- Auto-ON/auto-OFF with 20-minute time out
- Sensitivity set to 75%
- Nightlight and daylighting disabled
- Convenient pushbutton hold configuration for installers without a smart device*:
Pushbutton Hold Configuration
Button (#)| Operating Mode| Sensitivity (%)| Time Out
(mins)
1| Auto-ON/ Auto-OFF| 75| 10
2| 20
3| 100| 10
4| 20
5| Manual-ON/ Auto-OFF| 75| 10
6| 20
7| 100| 10
8| 20
*Requires removal of front face cover
Wiring Diagrams
Field of View Diagram
Dimensions Diagrams
Specifications
Electrical
Input Voltage/Frequency| 120-277VAC, 50/60Hz
Input Current
120V| Standby: 0.2W
Max: 0.5W+Load Current
277V| Standby: 0.3W
Max: 0.6W+Load Current
Load Ratings
General Purpose @ 120V| 10A
General Purpose @ 277V| 10A
LED/Electronic Ballast @ 120V| 8A
LED/Electronic Ballast @ 277V| 5A
Standard Ballast @ 120V| 10A
Standard Ballast @ 277V
Tungsten @ 120V| 6.67A
Tungsten6f7276@ 277V
Motor @ 120V| 1/4HP (FLA 5.8A)
Motor @ 277V| 1/3HP (FLA 3.0A)
IP Rating| IP20
Network Connections| BLE 4.2, BLE 5.0
Environmental
Operating Temperature| 32 to 104°F (0 to 40°C)
Storage Temperature| -40 to 185°F (-40 to 85°C)
Physical
Dimensions| 4.13” x 2.12” x 1.86” (104.90mm x 53.95mm x 47.25mm)
Other
Energy Codes| Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24,
Part 6 occupancy/vacancy sensing, dimming, and manual-ON/auto-OFF requirements
Listings| IECC, UL and cUL listed; JIS Z 2801:2000
Certifications| FCC, ICC
Warranty| Limited five-year warranty
Leviton Manufacturing Co., Inc. Lighting & Controls
201 North Service Road, Melville, NY 11747-3138 tel
800-323-8920 tech line (8:00AM-10:00PM
ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun
800-824-3005 ©2024 Leviton
Manufacturing Co., Inc. All rights reserved. Subject to change without notice
Ordering Information
Smart Wallbox Sensors
Cat. No.| Description
ODD10-IDW| Smart PIR 0-10V Dimming Wallbox Sensor, App configurable; Auto-ON
/Auto-OFF or Manual-ON/ Auto-OFF, neutral wire required,
120/208/220/230/240/277VAC, 50/60Hz; White
ODD10-IDI| Smart PIR 0-10V Dimming Wallbox Sensor, App configurable; Auto-ON
/Auto-OFF or Manual-ON/ Auto-OFF, neutral wire required,
120/208/220/230/240/277VAC, 50/60Hz; Ivory
011-ODD10-IDW| Smart PIR 0-10V Dimming Wallbox Sensor, Antimicrobial, App
configurable; Auto-ON/Auto-OFF
or Manual-ON/Auto-OFF, neutral wire required, 120/208/220/230/240/277VAC, 50/60Hz; White
012-ODD10-IDI| Smart PIR 0-10V Dimming Wallbox Sensor, Antimicrobial, App
configurable; Auto-ON/Auto-OFF or Manual-ON/Auto-OFF, neutral wire required,
120/208/220/230/240/277VAC, 50/60Hz; Ivory
ODDKT-00E| Smart Dimming Wallbox Sensor Color Change Kit, Black
ODDKT-00R| Smart Dimming Wallbox Sensor Color Change Kit, Red
ODDKT-00G| Smart Dimming Wallbox Sensor Color Change Kit, Gray
ODDKT-00I| Smart Dimming Wallbox Sensor Color Change Kit, Ivory
ODDKT-00T| Smart Dimming Wallbox Sensor Color Change Kit, Light Almond
ODDKT-00W| Smart Dimming Wallbox Sensor Color Change Kit, White
Note: Wallplate sold separately. Order 80401-2AW, 1-Gang Decora Wallplate, antimicrobial treated.
Leviton Manufacturing Co., Inc. Lighting & Controls
10385 SW Avery Street, Tualatin, OR 97062 tel
800-736-6682 tech line (6:00AM-4:00PM
PT Mon-Fri) 800-959-6004
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel
800-323-8920 tech line (8:00AM-10:00PM
ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun)
800-824-3005
Visit our Website at:
www.leviton.com/smartsensors
©2024 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change
without notice.
LES-G-10402F/G24-mm REV JUL 2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>