LEVITON ODSMT-MDx Smart Multi Tech Wall Box Sensor Owner’s Manual
- August 24, 2024
- Leviton
Table of Contents
LEVITON ODSMT-MDx Smart Multi-Tech Wall Box Sensor
Description
The Leviton Smart 0-10V Wallbox Sensor (ODSMT-MDx) uses Passive Infrared (PIR) detection and Microphonics technology to monitor a room for occupancy. The PIR sensor uses a specialized segmented and tamper-resistant lens that divides the field of view into sensor zones. When a person passes in or out of a sensor zone, the sensor detects motion and switches the lights ON.
The lights will remain ON as long as an occupant moves through the sensor zones and will turn off when space becomes vacant after the timeout expires. ODSMT also utilizes Mircrophonic technology that “listens” for human activity in space and will keep the lights ON when motion is detected. Microphonics does not require a direct line of sight and can pick up human activity behind obstructions that PIR-only devices are unable to detect. The ODSMT features a vacancy mode for manual-ON/auto-OFF operation, ideal for installations where manual-ON switching is required for energy code applications.
A “minor motion” zone detects small body movements. This detection allows the lights to remain ON when individuals in the space are more stationary. The “major motion” zone exhibits a lesser degree of sensitivity requiring larger movements. Configuration of the ODSMT is made using the Leviton Smart Sensor App from a smartphone or other Bluetooth®-enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several popular pre-configured options. The ODSMT integrates a photocell for daylighting holdOFF which can be programmed using the Leviton Smart Sensor App.
Applications
- Office
- Small Lobbies
- Meeting Rooms
- Bathrooms/Restrooms
- Conference Rooms
Features
- Can be used to comply with ASHRAE 90.1, IECC, and 2022
- Title 24, Part 6 occupancy/vacancy sensing, switching, and manual-ON/auto-OFF requirements
- Fits in a standard wall box and is changeable with other units
- Use the Leviton Push to Pair (P2P) process to create a multi-way system for up to 5 devices
- Controls General-purpose plug loads up to 20A and LED lighting loads up to 10A
- One relay module for single-level switching
- 180° field-of-view provides approximately 1,100 square feet of coverage
- Latest PIR technology accurately detects minor motion up to 400sq ft and major motion up to 1,100 sq ft
- Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side
- Microphonics technology can detect minor human activity and does not require direct line-of-sight
- Integrated photocell for daylighting hold-off
- Tamper-resistant PIR lens
- Antimicrobial-treated faceplate and wallplate available
- Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth-enabled Android or iOS device:
- Set the operating mode for Occupancy (Auto-ON/AutoOFF) or Vacancy (manual-ON/auto-OFF)
- Adjust sensitivity and timeouts
- Enable the integrated photocell for daylighting hold-OFF and select target daylighting hold-OFF levels
- Create custom templates for easy multi-room replication of sensor settings
- Activate the nightlight and select the nightlight color
- Set a security code to lock configuration settings
- Out-of-the-box configuration default mode
- Auto-ON/Auto-OFF with 20-minute timeout
- Sensitivity set to 75%
- Nightlight and daylighting disabled
Features (continued)
Convenient pushbutton hold configuration for installers without a smart device
Pushbutton Hold Configuration
Button (#)
| Operating Mode| PIR
Sensitivity (%)
| Microphonics Sensitivity (%)| Time Out (mins)
1|
Auto-ON/ Auto-OFF
|
75
| 75| 20
2| 10
3| OFF|
20
4| 50
5| 100| 75
6| 100
7|
Manual-ON/ Auto-OFF
|
75
| 75
8| 10
9| OFF|
20
10| 50
11| 100| 75
12| 100
Requires removal of front face cover
Wiring Diagram—ODSMT-MDx
Field of View Diagram
Dimensions Diagrams
Specifications
Electrical
Input Voltage/Frequency
120-277VAC| 50/60Hz
120VAC| 60Hz
Input Current
120V| Standby: 0.2W; Max: 0.5W+Load Current
277V| Standby: 0.3W; Max: 0.6W+Load Current
Load Ratings
General Purpose @ 120V| 20A
General Purpose @ 277V*
LED/Electronic Ballast @ 120V| ****
10A
LED/Electronic Ballast @ 277V*
Standard Ballast @ 120V
Standard Ballast @ 277V
Tungsten @ 120V| 6.67A
Tungsten @ 277V
Motor @ 120V| 1/4HP (FLA 5.8A)
Motor @ 277V| 1/3HP (FLA 3.0A)
IP Rating| IP20
Network Connections| BLE 4.2, BLE 5.0
Environmental
Operating Temperature| 32 to 104°F (0 to 40°C)
Storage Temperature| -40 to 185°F (-40 to 85°C)
Physical
Dimensions| 4.13” x 2.12” x 1.86” (104.90mm x 53.95mm x 47.25mm)
Other
Energy Codes| Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24,
Part 6 occupancy/ vacancy sensing, and manual-ON/auto-OFF requirements
Listings| IECC, UL, and cUL listed; JIS Z 2801:2000
Certifications| FCC, ICC
Warranty| Limited five-year warranty
Ordering Information
Note : The Wallplate is sold separately.
Leviton Manufacturing Co., Inc. Lighting & Controls
10385 SW Avery St, Tualatin, OR 97062 tel
800-736-6682 tech line (6:00 AM-4:00 PM
PT Mon-Fri) 800-959-6004
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747-3138 tel
800-323-8920 tech line (8:00 AM-10:00
PM ET Mon-Fri, 9:00 AM-7:00 PM ET Sat, 9:00 AM-5:00 PM ET Sun
800-824-3005
Visit our Website at:
www.leviton.com/smartsensors 2024
Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without
notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>