heysong HS-BH01 Wireless Headphones User Guide
- June 13, 2024
- heysong
Table of Contents
heysong HS-BH01 Wireless Headphones
Package Contents
Product Diagram
- Speaker
- Volume + (long press) Previous Track
- Multi-functional buttons
- Volume – (long press) Next Track
- Power Button
- Working Indicator
- Type-C Charging Port
- 3.5mm Audio Port
How To Use
- Bluetooth Name: Heysong HS-BHO1
- Bluetooth Chip: JL5.3
- Speaker Unit: OD40mm
- Talking Microphone: ECM4015, -42db#3db
- USB Interface Type: Type-C
- Audio Connector Type: 3.5mm
- Power on Button: On/Off
- Bluetooth Button: On/Off
- Ensure that the headphone and your Bluetooth® device are adjacent (within 3ft/1m).
- Once switched on, the headphone enters pairing mode and the LED flashes blue and red.
- Turn on your phone’s Bluetooth search:Heysong HS-BHO1 for pairing, and the second power on will automatically connect back after pairing is complete.
Play/Pause:
- Previous Song: Click Volume +
- Next Song: Click Volume-
- Volume – Long press volume-
- Volume +: Long press volume +
- In Play: Click on the multi-function button to Play/Pause
- Low Battery Reminder: Device connection state, the voltage is lower than 3.3V reported low battery tips (30 seconds apart once).
- Charging: Charging will start automatically with the LED indicator turning red. The headphones are fully charged when the Red LED indicator turns off, Blue light on constantly.
- Power display: device connection status, Bluetooth connection Bluetooth, there is a power display (some devices do not support this function)
Volume limit designed for children
Press and hold Volume+/Volume- for three seconds to switch between 85B/95dB maximum volume limit (default limit is 85dB).
Caution
- The headphone is not waterproof and must not be immersed in or splashed with water; -The product must not be used in extreme temperatures.
- The internal structure of the headphone must not be opened and does not contain any parts that require maintenance by the user. If opened, the warranty of the product will be void.
- The headphone should only be cleaned with a soft cloth and no burr-prone cleaning products should be used.
- This product should not be used when driving, cycling, etc. when full attention is required.
- This product is not suitable for use with high-power amplifiers, please use this product with care.
COMPLIANT
ROHS
Complies with the EU ‘Restriction of the Use of Certain Hazardous
Substances Directive, which restricts the use of certain hazardous materials
and products in order to protect the environment.
This product is CE-marked and labeled to comply with all provisions of the RoHS Directive 2011/65/EU.
FCC Requirement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications, However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does causell harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
Applicable in countries with separate collection systems) This marking on the
product, accessories, or literature indicates that the product and its
electronic accessories should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their suppliers
and check the terms and conditions of the purchase contract. This product and
its electronic accessories Changes or modifications not expressly approved by
the party responsible for compliance could void your authority to operate the
equipment.
Contact Information
HS-BHO1
www.heysongaudio.com.
EUROPE
- Email:
- heysong.eu@gmail.com
- heysong.uk@gmail.com
- EU Importer: WOTRONICS GmbH
- Address: Beblostr.13 c/o Liu, 81677 Munich, Germany.
MANUFACTURER
Dongguan Peilin Acoustic Technology Co., Ltd.
Address:
Building B, 3rd floor, Jinwanxin Industrial Park, Shiheng Avenue, Shipai Town,
Dongguan City, Guangdong Province, China, 518110
Learn more about the EU Declaration of Conformity:
https://www.heysongaudio.com/down-loads-HS-BH01-CE-Cert.html.
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>