FORTIN 2021-2023 Toyota Hybrid Hush to Start Installation Guide
- August 23, 2024
- FORTIN
Table of Contents
FORTIN 2021-2023 Toyota Hybrid Hush to Start
Specifications
- Model: EVO-ONE
- Manufacturer: Fortin Compatible with vehicles manufactured after 2019
- Features: Immobilizer bypass, Lock/Unlock, Arm/Disarm, Trunk (open), Horn, Parking Light, Tachometer, Power Lift Gate, Rear Defrost, Heated Wiper, Heated Seats, Heated Mirrors, and more
Product Usage Instructions
Installation Requirements
Make sure the vehicle is compatible with the product and manufactured after
2019. Ensure a qualified technician installs the module to avoid damage.
Programming Options
Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool to add firmware
versions and options.
Mandatory Installation
Install the HOOD PIN switch if the vehicle can be remotely started with the
hood open. Follow guidelines for proper connections.
Wiring Connections
Refer to the wiring diagram provided in the manual for proper connections.
Ensure all connections are secure and correct.
REGULAR INSTALLATION
NOTES
The vehicles OEM remote and SmartKey are still operable during remote
start.
MANDATORY INSTALL
Notice: the installation of safety elements is mandatory. The hood pin
and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE
This guide may change without notice. See www.fortin.ca for the latest version
DESCRIPTION
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
KEY BYPASS PROGRAMMING PROCEDURE 2/3
KEY BYPASS PROGRAMMING PROCEDURE 3/3
KEY BYPASS PROGRAMMING PROCEDURE 3/3
REMOTE STARTER PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualified technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
www.fortinbypass.com
WEB UPDATE
FAQ
- Q: What should I do if my vehicle is not equipped with a functional hood pin?
- A: If your vehicle does not have a functional hood pin, set function A11 to OFF as per the instructions.
- Q: What parts are required for remote starter option installation?
- A: You will need 3X 1 Amp. Diodes (not included) for the installation of the remote starter option.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>