FORTIN EVO-ONE Thar One Toy16 Installation Guide
- August 23, 2024
- FORTIN
Table of Contents
FORTIN EVO-ONE Thar One Toy16
Specifications
- Model: EVO-ONE
- Compatibility: Toyota Corolla Hatchback Push-to-Start 2023-2024, Sedan Push-to-Start 2023
- Manufactured after: 2019
- Firmware Version: 88.[33] (minimum)
INSTALLATION HARNAIS
INSTALLATION HARNAIS THAR-ONE-TOY16
ADDENDUM – SUGGESTED WIRING CONFIGURATION
NOTES: The vehicles OEM remote and SmartKey are still operable during remote start.
MANDATORY INSTALL
Notice: the installation of safety elements are mandatory. The hood pin
and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
This guide may change without notice. See www.fortin.ca for latest version.
DESCRIPTION
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
KEY BYPASS PROGRAMMING PROCEDURE 3/3
REMOTE STARTER PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our website on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) before the installation of this
product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualified technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
TECH SUPPORT
T él: 514-255-HELP (4357)
1-877-336-7797
FAQ
- Q: Can I install this product myself?
- A: It is recommended to have a qualified technician install the module to prevent any damage to the vehicle.
- Q: How do I add firmware versions and options?
- A: Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, which are sold separately, to add firmware versions and options.
- Q: What should I do if the vehicle can be remotely started with the hood open?
- A: Set function A11 to OFF and install the Hood Pin switch to ensure proper functioning.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>