VEVOR MHT-P8008 Thermal Printer User Guide
- August 22, 2024
- VEVOR
Table of Contents
VEVOR MHT-P8008 Thermal Printer
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
| Symbol | Symbol Description |
|---|---|
| Warning: To reduce the risk of injury, the user must read the |
instructions manual carefully.
| This symbol, placed before a safety comment, indicates a kind of precaution,
warning, or danger. Ignoring this warning may lead to an accident. To reduce
the risk of injury, fire, or electrocution, please always follow the
recommendation shown below.
**| CORRECT DISPOSAL:**
This product is subject to the provision of European Directive 2012/ 19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.
**| BATTERY DISPOSAL**
To minimize hazards to health and the environment at the end of this product’s life laws dealing with Waste Electrical and Electronic Equipment（ WEEE） and The Waste Battery Directive require you to dispose of this product at a suitable collection facility where it will be sent in order to remove the batteries and for appropriate recycling. Please contact your local authorities for more details on recycling and safe disposal of these in your area.
FCC INFORMATION
CAUTION : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This product may cause harmful interference.
- This product must accept any interference received, including interference that may cause undesired operation.
WARNING : Changes or modifications to this product not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the product.
Note : This product has been tested and found to comply with the limits
for a Class B digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does
cause harmful interference to radio or television reception, which can be
determined by turning the product off and on, the user is encouraged to try to
correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the distance between the product and receiver.
- Connect the product to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
Printing precautions
- It is recommended not to print in high humidity and dusty areas.
- If the print head is too hot after printing, do not touch it directly.
- Do not touch the print head when changing print paper.
- To prevent static electricity from damaging the print head, do not touch the print head.
Precautions during charging
- Do not forcefully insert or remove the charging cable.
- Please disconnect the power after charging.
- Please use the original power cord to charge. Otherwise the printer may overheat, catch fire, and burn out.
- Do not charge in high temperature environments.
- If the wrong type of battery is replaced, there is a risk of explosion. It is prohibited to replace the battery without permission, as replacing the battery without permission will lose the warranty.
Appearance and components
Indicator lights and button operation
- Turn on/of button （long press button）
- Paper output button
- Power light
- Error light
- Charging light
- Bluetooth light
- Open button (drop-down)
- Charging port (Type-C/USB)
| Light and Button | Situation |
|---|---|
| power light | Blue light is on all time when turn on. |
| charging light | Blue light when charging. Full charge blue light out. |
| --- | --- |
| Error light | Blue light is on when you do not place the transfer paper |
correctly. When the power is low or there is no power, the error light will be
on
Bluetooth light| The connection is always bright /Turn of when not connected.
Operating instructions
Notes on paper placement
-
Long press the power button to turn on, and press”↓”the open lid button to open the lid, the power light and Error light on.
-
Take out the transparent removable sheet.
-
Insert the transfer paper with the yellow page facing up and the white page facing down, leaving a 1cm spacing at the paper outlet.
Note : when the tattoo printer is out of paper, the buzzer will sound and the error indicator will light up. It will flicker, which is a normal phenomenon. -
After installing the transfer paper, prepare your mobile phone（iOS or Android）to connect to the machine. Start printing the pattern you want.
The quality of the transfer paper will affect the printing effect(The quality of the transfer paper is determined by the uniformity of the ink sheet.)
Intelligent interconnection
Smart phone connection printing operation
After downloading the app, turn on Bluetooth and Location and connect to the printer. All other operations are the same as iOS.
Precautions
common problem
| problems | causes | solutions |
|---|---|---|
| No pattern after | ①The transparent protective | ①Remove the transparent |
| printing | sheet in the middle of the | protective sheet from the |
| transfer paper is not | transfer paper. | |
| removed. | ②Follow the instructions to | |
| ②The transfer paper is not | Insert the transfer paper | |
| inserted correctly. | correctly. | |
| Printing blur | Printer is not cleaned for a long time and consumables |
are bad
| Clean the printer rollers and thermal bar with anon oven
cloth with alcohol
The printer keeps making noise| The paper warehouse cover is not fastened or the paper
is not properly placed.
| Cover the cover or put the paper correctly
The printer automatically turns off/Printings intermittently| Battery
depletion| charging soon
Equipment parameters
Effective printing width
210mm
| Resolving power
203dpi
---|---
Battery capacity
2500mAh
| connection mode
Bluetooth
paper size
A4 Tattoo transfer paper
| support system
Android & IOS
Input
5V2A|
The size is measured manually,please refer to the actual product
Address Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
Technical Support and E-Warranty Certificate www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>