R and G SFF0001 BSA Gold Star Front Fender Instructions

: August 22, 2024
: R AND G

Table of Contents

R and G SFF0001 BSA Gold Star Front Fender Instructions
Assembly Diagram 1
FITTING INSTRUCTIONS
Replace the OEM bolts into the now un-used holes on the fork bottoms,
Replace the 4 original bolts to secure the new fender as shown in
It is suggested that you check the tightness of the mounting bolts on a
CONSUMER NOTICE
R&G RETURNS POLICY (NON-FAULTY GOODS)
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

R and G SFF0001 BSA Gold Star Front Fender Instructions

DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM WWW.RG- RACING.COM

LEGEND

Assembly Diagram 1

TOOLS REQUIRED

· Allen Keys

· 10MM Spanner

| GENERAL TORQUE SETTINGS

M4 BOLT = 8Nm M5 BOLT = 12Nm M6 BOLT = 15Nm M8 BOLT = 20Nm M10 BOLT = 40Nm

M12 BOLT = 40Nm

---|---

FITTING INSTRUCTIONS

Using a hex key & 10mm spanner, remove the fender support struts from the front fender as shown in Picture 1.
Remove the lower support strut mounts as shown in Picture 2, these are no longer

Replace the OEM bolts into the now un-used holes on the fork bottoms,

this improves the look and will keep the threads covered.

Remove the 4 x upper fixing bolts for the original fender and carefully remove the
Manoeuvre the new shorty front fender into position. Note that the replacement fender can be placed with the longer side facing towards the front or rear of the bike depending on visual

Replace the 4 original bolts to secure the new fender as shown in

picture 3.

for the cleaning of this product you should only use a soft polishing cloth and a mild general cleaning agent. AVOID HARMFUL CHEMICALS. if in doubt, do not use as they could alter the strength or damage the finish of the fender.

It is suggested that you check the tightness of the mounting bolts on a

regular basis i.e., when cleaning or once a month.

ISSUE 1 04/01/2024 (DM)

CONSUMER NOTICE

The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those in R&G’s order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R&G fits the Products or undertakes other services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its option either supply a replacement or refund the purchase money but shall not be liable if the Products have been modified or used or maintained otherwise than in accordance with R&G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident or neglect. Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.

]

R&G RETURNS POLICY (NON-FAULTY GOODS)

Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-sellable condition, in the opinion
of R&G. All returns are subject to a 25% restocking and handling fee (25% of the gross value exc. P&P – at the prevailing price at time of purchase).
The customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does not affect your statutory rights and does not refer to faulty goods