FORTIN 2022-2024 Evo One Toyota Tundra Vehicle Installation Guide

: August 20, 2024
: FORTIN

Table of Contents

FORTIN 2022-2024 Evo One Toyota Tundra Vehicle
Product Information
Product Usage Instructions
Vehicle functions
INFORMATION
DESCRIPTION
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
REMOTE STARTER
Updated Firmware and Installation Guides
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FORTIN 2022-2024 Evo One Toyota Tundra Vehicle

Product Information

Specifications

Model: EVO-ONE
Compatibility: Toyota Tundra Hybrid Push-to-Start 2022-2024
Firmware Version: 88.[33] (minimum)
Required: Manufactured after 2019

Product Usage Instructions

Installation Process

Before starting installation, ensure that the vehicle is compatible and meets the specified requirements.

Program the bypass option as per the instructions provided.
Install the required components, including the hood pin switch if necessary.
Connect the wiring based on the provided wiring connection guide.
Cut the loop for automatic transmission mode if applicable.

Programming Remote Starter Option

Follow these steps to program the remote starter option:

Access the unit options and select the desired settings.
Ensure that the temperature option is activated at 5°C for proper functionality.

Safety Instructions
It is strongly recommended that this module be installed by a qualified technician to prevent damages to the vehicle.

Ensure all connections are made correctly to avoid any potential risks.

Vehicle functions

Vehicle functions supported in this diagram (functional if equipped)

INFORMATION

NOTES

The vehicles OEM remote and SmartKey are still operable during remote start.

MANDATORY INSTALL

HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

SECURITY STICKER

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

NOTES

Parts required (Not included)

3X 1 Amp. Diodes

DESCRIPTION

WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

KEY BYPASS PROGRAMMING PROCEDURE

REMOTE STARTER

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

Updated Firmware and Installation Guides

Notice: Updated Firmware and Installation Guides

Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice.

Visit www.fortinbypass.com to get the latest version.

FAQ

Q: What firmware version is required for the module?
A: The minimum required firmware version is 88.[33].

Q: Is the hood pin switch necessary for remote starting?
A: Yes, if the vehicle can be remote started with the hood open,the hood pin switch must be installed.

Q: What safety precautions should be taken during installation?
A: It is crucial to ensure that all connections are made accurately to prevent any potential damage to the vehicle.