JYX-V15 Chargable Wireless Microphone User Guide
- June 9, 2024
- JYX
Table of Contents
User Guide of JYX-V15
Chargable Wireless Microphone
Technical Parameters
-
Product powered by 3.7V(18650) lithium battery.
-
Working Temperature: – 40 — 80C
Storage Temperature: – 40 — 90T -
Range of application:within 15m
-
Battery status indicator: The indicator flashes when battery low;the light turns red while charging and turns blue when fully charged.(Same as the receiver)
Instructions
1. Microphone ON/OFF
- Install the battery into battery case(Note the battery positive and negative).Press the power button to turn the microphone on.
- Press the power button again to turn the microphone off.
2.Receiver ON/OFF
- Install the battery into the receiver.
- Turn on the receiver,then it will automatically pair with microphone.
Microphone Pairing
Turn on the receiver and plug it into the 6.35mm jack of your audio device,
turn on the microphone switch to pair them two.
After completing the above operation, you can use this microphone system
normally.
Matters Needing Attention
- Please install the battery anode and cathode correctly;
- Please contact customers service if you have any questions: service-us@szjyx.com.cn
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>