EUROfase LIGHTING 47200 Greyson 16 Tall LED Outdoor Wall Sconce Installation Guide
- August 20, 2024
- EUROfase LIGHTING
Table of Contents
EUROfase LIGHTING 47200 Greyson 16 Tall LED Outdoor Wall Sconce
Product Information
Specifications:
- Model: GREYSON 47200
- Power: 12W MAX, LED, 120V~, 60Hz
Product Usage Instructions
Important Safety Instructions:
Ensure proper installation by following these safety instructions:
- Connect the fixture’s ground wire to the grounding conductor of the supply circuit.
- If the junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the mounting bracket.
Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
Helpful Tools (not included):
- Wire strippers
- Ladder
FAQ:
Q: How do I contact Customer Service & Tech Support?
A: You can reach Customer Service & Tech Support at
905-695-2147 or via email at
Info@eurofase.com.
Q: What is the address of Eurofase for correspondence?
A: Eurofase’s address for correspondence is 33 West Beaver Creek Rd,
Richmond Hill, Ontario, Canada L4B 1L8.
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment
Integrated LED included
12W MAX,LED,120V~,60Hz
IMPORTANT SAFETY INSTRUCTIONS
- Attention to installer, must test the light fixture before installation.
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Wrap the green (or bare copper) grounding wire from the fixture around the green screw on the mounting bracket, then connect it to the grounding conductor of the supply circuit. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the mounting bracket.
- This unit is to be wall mounted only.
- This unit is suitable for indoor and outdoor use.
- This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
- Save this instructions for future reference.
- Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver,
Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.
TOOLS
ASSEMBLY INSTRUCTION
Apply the silicone gel (not included) around the fixture body where it comes into contact with the wall.
Customer Service & Tech Support: 905-695-2147
Email: Info@eurofase.com
33 West Beaver Creek Rd, Richmond Hill, Ontario Canda L4B 1L8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>