FORTIN 2024 Subaru Push to Start Installation Guide
- August 20, 2024
- FORTIN
Table of Contents
FORTIN 2024 Subaru Push to Start
REGULAR INSTALLATION
SUGGESTED WIRING CONFIGURATION
Parts required (Not included)
- 2X 1 AMP Diode
- 1X RF Kit
NOTES
MAKE SURE THE KEY IS NOT INSIDE THE CAR WHEN THE REMOTE STARTS.
MANDATORY INSTALL
INSTALLATION OBLIGATOIR
Notice: the installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
This guide may change without notice. See www.fortin.ca for the latest version
AUTOMATIC TRANSMISSION WIRING CONNECTION
KEY BYPASS PROGRAMMING PROCEDURE 1/3
KEY BYPASS PROGRAMMING PROCEDURE 2/3
KEY BYPASS PROGRAMMING PROCEDURE 3/3
FUNCTIONS
Notice : Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe
logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS
assumes absolutely no liability or responsibility whatsoever about the
accuracy or currency of the information supplied.
The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly, or in any other way.
Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
TECH SUPPORT
Tél: 514-255-HELP (4357) 1-877-336-7797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>