FORTIN 2017-2022 Hyundai Push to Start Installation Guide

REGULAR AND THAR-ONE-KHY7 REV.2 THARNESS INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
Vehicle functions supported in this diagram (functional if equipped)

• Lock
• Unlock
• Arm
• Disarm
• Trunk (open)
• Horn
• RAP Control
• Auto-Light Control
• Parking Lights
• Tachometer
• Door Status
• Trunk Status
• Hand-Brake Status
• Hood Status*
• R.S. OEM remote
• Stand Alone compatible
• Secure Take Over
• OEM Remote monitoring

HYUNDAI

Ioniq
Electric/Hybrid – Push to Start 2017-2022

BYPASS
FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT 76.[60] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option:

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

Program remote starter option for R.S. OEM REMOTE STAND ALONE:

NOTES
THAR-ONE-KHY7 REV.2
THAR-ONE-KHY7 REV.2 ONLY must be used (Not included)
Utilisation du THAR-ONE-KHY7 REV.2 SEULEMENT (Non inclus)

WIRE TO WIRE DIAGRAM
2x Diodes| Page 2
THARNESS DIAGRAM
THARNESS
THAR-ONE-KHY7 REV.2| 1x THAR-ONE-KHY7 REV.2
1x 3/8 nut extractor tool| Page 4

MANDATORY INSTALL

• HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) MUST BE INSTALLED IF THE VEHICLE CAN BE
REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11

SECURITY STICKER
WARNING Included
Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

THAR-ONE-KHY7 DESCRIPTION

T-HARNESS – INSTALLATION PROCEDURE

WARNING
The security plate may need to be removed to have access to the smart key module connectors.
You would need a nut extractor and a ratchet to remove the plate’s tamper proof screws.

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE

Press and hold the programming button:
Insert the 6-Pin Main connector
The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.

Release the programming button when the LED is RED.
If the LED is not solid RED disconnect the 6 Pin connector (Main-Harness) and go back to step 1.

Insert the required remaining connectors.

Press releaseand the programming button 6 times (6x).
The RED LED will flash 5 times and pause.

Press and release the Push-to- Start button twice to turn ON the ignition.
“The RED LED will flash rapidly 10x times.
Key bypass programmed.
The BLUE LED will flash rapidly.

CAN-Bus programmed.
Press and release the Push-to- Start button once to shut off the ignition.
The BLUE LED will turn off.

The module is now programmed.
Use the remote of the remote starter or security system to test all of the supported features to ensure proper programming.

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity remote
| Enter the vehicle with the SMART-KEY.
| DO NOT PRESS THE BRAKE PEDAL.
Press and release the Push-to-Start button once.
| Press the brake pedal.
The vehicle can now be put in to gear and driven.
If the Smart-Key is not detected the vehicle will shut down.

REMOTE STARTER FUNCTIONALITY WITH VEHICLE CONNECTED TO CHARGER

| All doors must be closed.
---|---
| Remote start the vehicle.
| Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity remote
| Enter the vehicle with the SMART-KEY.
| Press the brake pedal.
| Press and release the Push-to-Start button once.
| The vehicle can now be put in to gear and driven.

Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

This guide may change without notice. See www.fortin.ca for latest version.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>