Joom Q95 Smart Phone Holder Instruction Manual

: August 19, 2024
: JOOM

Table of Contents

SMARTPHONE HOLDER
Q95

SMARTPHONE HOLDER

Q95

operation instructions

Thank you for purchasing and using this product, in order to bring you For a better user experience, please read this manual carefully.

Packaging List and Introduction

Product Name: Intelligent Car Wireless Charging
Wireless charging power 15W/10W/7.5/5W
Best wireless charging distance: 0-6mm
Device interface: Type-C

Packing list

Host x 1
Instructions x 1
J-shaped air outlet clamp x 1
Type-C data cable x 1
Magnetic suction head x 3 (Apple, Type-C, Android)

Function Introduction

Introduce

Glass panel
Clamp arm
Infrared induction
Magnetic suction port

Function

This product adopts a silent motor, the bottom noise is silent, it is easy to clamp the mobile phone, supports wireless charging, and does not come with a mobile phone with wireless charging function It can also be charged by connecting the magnetic suction head, fully automatic infrared sensor, when the mobile phone is close, the clamp arm can be opened, Intelligent locking, built-in large-capacity battery, in the event of a power failure, the electric opening and closing function can still be used.

Features

Charging function: wireless charging, charging when the phone is placed; magnetic charging, built-in magnetic module, connected to the magnetic head to charge
Built-in battery: available when power off, without wiring, can use electric opening and closing 300-500 times
Electric opening and closing: automatic induction, one-touch opening, one-handed operation
Exquisite appearance: luminous screen, charming atmosphere light, electroplated shell, smooth feel

Specifications

Model: Q95
Color: black
Weight: The net weight of the product is about 118g
Material: PC+ABS
Executive standard: GB 4943.1-2022
Input voltage/current: DC5V/2A, DC9V/1.67A
Magnetic head output power: DC 5V/2A
Wireless charging output power: 15W, 10W, 7.5W, 5W automatic identification
Charging power: 110K-205KHz
Charging distance: 0-8mm
Supported specifications: Compliant with QI wireless protocol charging (including but not limited to the following mobile phones)
Devices that support QC wireless fast charging, such as full series of iPhone 14/iPhone 13/iPhonel2/ iPhone 11/iPhone X; full series of Huawei P60/P50/P40/Mate50/Mate40; full series of Galaxy S21/S20/Note20/ Notel O and other mobile phones with built-in wireless charging module
Devices that do not support wireless charging need to be connected to a magnetic head before they can be used.

Instructions

1. Connect the power supply
Connect the USB end of the data cable to the rechargeable interface on the car (it is not recommended to use the original USB interface of the car, it is recommended to connect the cigarette lighter car charger)

2. Infrared sensor
When the front of the object is close to the device by 5cm-20cm, it will automatically sense and open the clamp arm.

3. Touch sensor
To take out the mobile phone, just touch the raised sensor point on the top of the rear case, and the bracket will automatically open the clamp arm to take out the mobile phone.

4. Charging function
After putting the mobile phone in, the device will automatically clamp the mobile phone, and at this time, the bracket will charge the mobile phone with its own wireless charging function. Connect the magnetic suction head to the mobile phone without wireless charging function, and then place the bracket on the contact point of the magnetic suction head to charge.

5. Built-in battery
In the fully charged state, the electric opening and closing can be used normally for 300-500 times even if the bracket is not connected to the power supply.

Precautions

Do not squeeze or bump the device excessively.
Do not use the device in severe high temperature, humid or corrosive environment Avoid damaging the electrical circuits of the device.
The source of power supply for the device is recommended to use a car charger to connect to the power supply in the car. Directly connected to the car’s own USB port, there may be slow charging Problems such as charging or not.

Thank you for using this product!

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter.