JOOM MJ07 Mobile Phone Wireless Selfie Stick User Manual
- June 6, 2024
- JOOM
Table of Contents
selfie stick How to use
MJ07
compatible
**√** ios
**√**Android
Steps for using Bluetooth remote control
- Press and hold the on key for 3 seconds to start the machine, and the LED indicator starts to flash. The mobile phone searches for the Bluetooth device name *selficom’ for matching. If the Bluetooth connection is successful, the LED indicator will go out.
- Click the key to control the photo-taking, and the LED indicator will flash once.
- If Bluetooth is not paired or matched for about 5 minutes, Bluetooth will automatically shut down.
- Press and hold for 3 seconds to turn off. When it is off, the LED light will flash three times.
- The remote control has a memory connection function, and it will automatically match the last matching mobile phone when it is turned on Warm reminder: if there are too many Bluetooth device names on your mobile phone, first turn on Bluetooth, clear all device names, and then turn on the Bluetooth remote control. The Bluetooth device name will be added to the Bluetooth interface, that is, to connect.
Self-timer take out and load
Removal and loading
How to change the battery
Push the battery cover upwards in the arrow position on the back of the self- timer and remove the battery for replacement.
Beauty light parameters
LED beads: 44
RGB beads: 22
Color temperature range:2900K-6500K
Batten/ specification: 18650/1200mAh
Current Voltage: 5V/1A-2.1A
Color Temperature Mode: Cool + Warm + Cool & Warm
RGB mode: 9
Beauty light function
Live broadcasting and photo shooting can be beautiful, pupil, eye protection, highlighting the five-facial stereo. A variety of RGB glare compensation modes, suitable for more live scenes, make live broadcasts full of fun!
Beauty light use
Battery capacity: 1200mAh
Service time: 2-3 h
Charging time: 2h
Figure 1: the micro USB charging port charges the lithium battery.
Figure 2: press and hold the ‘LEED on key” to turn the LED on and off. Short
key on key, adjust color temperature mode.
Product specifications
Product material: aluminum alloy + ABS Bluetooth remote control battery
specification: cr1632 (replaceable) Product color: Black / White / Pink
Warm reminder
Bluetooth remote control is compatible with Android 4.2.2 and iPhone 105
5.0 or above. (Android device: if you change your “volume key function” under
the camera option, be sure to change it to the default or “take a picture to
make the Bluetooth remote control work normally)
Thank you for your support! KCE0 RoHS
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.