Zambelis LIGHTS 22224 Pendant Light Instruction Manual
- October 30, 2023
- Zambelis LIGHTS
Table of Contents
LIGHTS 22224 Pendant Light
Instruction Manual
22224 Pendant Light
Connecting the Terminal Block
Connect main supply (brown – Live, blue – Neutral) into terminal block
making sure all connections are tight.
Please read instructions before commencing installation and
retain for future reference.
SPECIFICATIONS
- Material: Metal + Leather
- Lamp type: 5xGU10 . MAX 25W
- Ingress Protection: IP20. Protection against entry of solid objects greater than 12mm in diameter.
INSTALLATION INSTRUCTIONS
**** Electrical products can cause death, injury. or damage to property.
Maintenance and installation should only be carried out by a professional
electrician.
- Ensure main supply is switched off.
- Insert masonry plugs (1) into mounting surface.
- Fit mounting bracket (2) onto mounting surface with self-tapping screws.
- Insert masonry plugs (3) into mounting surface.
- Connect main supply wires to terminal block (4) making sure all connections are tight.
- Fit ceiling plate onto mounting bracket with screws (5).
- Adjust lights height with leather hanging belts (6 x2times).
- Reconnect power.
WARNING
- Make sure that the products is installed properly before connecting to electricity.
- Do not cover the fitting.
- Not for outdoor use or in wet conditions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>