JOOM Pro TWS Wireless Stereo Handset User Manual
- June 4, 2024
- JOOM
Table of Contents
JOOM Pro TWS Wireless Stereo Handset User Manual
Specifications
Wireless Version: | V5.0+EDR |
---|---|
Support Agreement: | A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 |
Bluetooth frequency: | 2.4GHz |
Bluetooth transmission distance: | 10-15m |
Battery capacity: | 30mAh |
Stand bytime: | 40Hours |
Playing/Talking time: | 2-2.5hours |
Charging box capacity: | 180mAh |
Product instructions
-
Opertion
steps Bilateral use: Open the top cover of the charging box and press the multi-function key of the charging box to turn on. Take out the headphones. The headphones automatically turn on – – the headphone indicator lights flashing aterately red and blue in the main ear and blue in the secondary ear once in 5 seconds.
Headphone pairing with mobile phone: The red and blue alternating flashing in the headphone’s main ear indicates that it needs to be paired with Bluetooth. Open the mobile phone settings Open Bluetooth–Search the Bluetooth name “pro” and click on the mobile phone connection. -
Steps for switching on and off of charger earphone
Earphone: Long press multi-function key for 3 seconds to turn on the blue light flash, long press multi function key for 4 seconds to turn off the red light, put the headphone into the charging bin to turn off automatically, and turn off automatically for 3 minutes when the headphone is disconnected. Charging bin: press the multi-function key to turn on, the green light is always on, press the multi-function key to turn off and the green light is off. -
Charging indication
When the charging bin is charged, the red light is always on and the indicator lights go out when it is full. When the charging bin charges the headphones, the green light the charging bin si always on, and the red light in the head- phones is always on: After thing, the charging bin and headphone indicator lights are out.
Product schematic diagram
Product Instructions
The last song | Double click right ear |
---|---|
The next | Double click left ear |
Play/Pause Dialing | Single click Normal |
Answer the phone | Click the button when calling |
Refusing the phone | Press 2 seconds button for calling time |
Sini function | Press 3 seconds long |
Earphone Matching | Hold the switch for 3 seconds at the same time with both |
hands until the red and blue lights flicker alternately and release. Just double-click any headset multi-function key, and the machine matches successfully. (Indicator; double-click multi-function key on one side is red and blue lights alternately, and the other side is blue lights once for 5 second.)
Precautions
-
The earphones should be stored in a dry and ventilated environment ,to avoid oil, water, moisture and dust affecting product performance.
-
Avoid using stimulus, organic solvents or items containing these ingredients to clean the earphone.
-
The use of earphones should be correctly as per the specification, pay attention to use the influence of environment on the earphones, In order to ensure the smooth connection, it’s recommended that the distance between the earphones and phones within 10 meters.
-
If the earphones failed to connect or with poor connection, pls do not take apart the earphones or the accessories on your own, Otherwise, no warranty..
-
Regarding charging earphones. Pls Use the standard usb cable or pointed charging cable from our company to charge the earphones.
-
In order to ensure normal use, please ensure suficient power of the earphones.
-
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>