JOOM M-D8 Sports Bone Conduction Wireless Headset User Guide
- June 5, 2024
- JOOM
Table of Contents
JOOM M-D8 Sports Bone Conduction Wireless Headset
Getting Started Guide
Headset overview
Make sure your Wireless headset is equipped with the following items: USB
charging cable, Wireless headset and instruction manual
Open the Bluetooth headset
- Power on long-press the multifunction button for about 3 seconds, and the blue light flashes for 3 times;
- Power off: long press the multifunction button for about 5 seconds, the red light is always on;
- .Pairing long-press the multifunction button for about 5 seconds and the red and blue lights will flash alternately to enter the pairing state;
- Answering up the call: click the multifunction button to answer an incoming call or hang up an ongoing call;
- Project cal long-press the multifunction button for about2 seconds;
- Listen/pause: click the multifunction button to pause playing;
- Voice wake up: wake up Sari long press for 2 seconds;
- Incoming call: no light. broadcast caller number,
- Redial double lick the multifunction button;
- Voice switching sritunouly pross volume + volume – button in paired mode;
- Low power reminder low power,
- Disconnect beyond connection range reminder: disconnected/connected;
- When charging red light is on;
- Full charging: blue light is on;
Headset pairing
- Long press the multifunction button for 5 seconds, when the indicator light red and blue flashes alternately, and the headset enters the pairing state.
- Open the Wireless on the mobile phone, search for the corresponding headset pairing name (M-D8 ) and lick the pairing connection
-
In the standby process, double-click the multi-function key, then can the last number redialing. later use, only press multi-function key 3 seconds then turn on (blue light fasn 3 time) it will automatically connect with last time succeed match phone
-
Disconnect the headset from the phone:
To disconnect the headset from the phone (For example, connect your phone to another Bluetooth device), use one of the following: Turn off headphones: Use the phone’s Wireless function to disconnect the Tun off Wireless function of your phone Move the headset to a distance of 10M (about 30 feet) away from the phone -
Headset charging
The red light of Wireless headset is always on when charging, and the blue light of the Wireless headset is always on when fully charged. A charging voltage can not be higher than 5V! -
Headphones to wear
According to the specific location of wearing headphones, the corresponding slightly adjustable ear sets.
Troubleshoot
Heard the sound of [Kaka]
- Because the Bluetooth agreement is open from the open location, accessible circumstances can reach to 10M, in which the human body is also the largest in terms of Wireless headset dry we recommend that you put your headphones on the same side of your phone to achieve the best results.
- Does the machine have no sound?
- Make sure the headset is activated and fully charged.
- Phone and headset is not connected?
- Make sure the headset is matched to the phone.
- Make sure your phone’s Bluetooth device is enabled.
- Make sure the headset is within 10 meters of the phone and not any obstructions, such as walls or other electronic equipment.
- If the above steps do not resolve the issue, ty the following:
- Recharge the headset.
- restart the phone.
- start the phone Wireless and delete the previous pairing history!
- the Wireless headset to re-match with the phone!
- Precautions:
- Do not place this headset in the position of the airbag inside the vehicle when the airbag pops up, it may cause serious injury.
- Do not let children play the headphones, small parts may make children have the risk of suffocation.
- Hospitals, blasting sites or places where potentially explosive atmospheres may ask the user to turn off the electronic equipment and radio. when you enter a specific area please pay attention to the instructions.
- Before boarding, please turn off the headset, to the aircraft can not use the headset.
- Tobenere poter you hearng. do not adust the volume too loud.
- Do not attempt to make any modification or disassembly of this headset.e
- Do not use this product n wet or rain.
- Do not clean the headphone while in the charging state. should first headphones and the charger separately, and then clean up.
Product quality Warranty card:
FCC Statement
This device complies with part 15 of the PCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority o operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>