JOOM TWS T10 Wireless Bluetooth Earphones User Manual
- June 5, 2024
- JOOM
Table of Contents
JOOM TWS T10 Wireless Bluetooth Earphones User Manual
TWS-T10 Digital display Manual
| Bluetooth version | V5.0+EDR |
|---|---|
| Bluetooth protocol | A2DP1.3 、 HFP1.6/HSP1.2/AVRCP16/D11.3 |
| Bluetooth Frequency | 2.4GHZ |
| Buttery capacity | **The headset 30 mAH,3250 mAH rechargeable |
storehouse
Bluetooth Range| 10-1 5metesrs with no obstacles
Talk/paly time| One pair earbuds mode: 3 hours**
Kay Functions
| Power on | Take out the headphones and turn them on |
|---|---|
| Power off | Press left/right for 5 seconds |
| Suspension/play | **Short press the key in connection (left or right, any |
earphone)
Next track| Press left/right for 1.5 seconds
Siri| Press left and right ears for 3 seconds and let go
Phone calls| Press left / right ear to answer any short call
Hang up the phone| Press left / right to hang up**
Instructions
Bluetooth pairing| The headset is removed and turned on automatically.
The left and right ears are automatically paired. After successful pairing,
the host red and blue lights alternately slow flash, when the phone search
Bluetooth name connection
---|---
Charging| Earphone alarm low power sound into the charging bin charge,
charging will automatically hang up, charging red light long light, after full
charge lights out
- please do not use violence to treat this product, do not use heavy to squeeze, the principle of high temperature and high humidity environment
- Away fromWIFI、routers and other high-frequency transmitter equipment, this will affect the local signal reception, resulting in sound card segment and disconnection
- Please use this product in an effective environment (10 meters) and do not have physical barriers between Bluetooth devices and level 2(e.g. walls)
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
‐‐Reorient or relocate the receiving antenna.
‐‐Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. FCC ID: 2AS7V-
TWS61A.