JOOM A12 Card Super Long Standby Neck Type Earphone Instructions
- June 6, 2024
- JOOM
Table of Contents
JOOM A12 Card Super Long Standby Neck Type Earphone Instructions
Know Headphone
Product parameters
- Version: V5.0
- Use Time: -100 hours
- Distance: 10-20 M(Barrier-free line)
- Working Voltage: 3.4-4.2V
- Impedance Ohmic Value: 32
- Speaker: 410mm/14.2mm
- Battery Capacity: 1000mAh
- Charging Time: -1.5 hours
- Charging Input: 5V-500 mah
- Working Current: 10-20mAh
- Frequency: 2.4-2.480GHZ
- Standby Time: -365day
Indicator description
- Power on: Blue light flashes.
- Pairing: Red and blue lights flash alternately.
- Work: Do not flash after connection.
- Charging: Indicator 1234 flashes in sequence.
The four battery indicator lights represent the percentage of the headset:
- One grid: 0-25% electricity
- Two grid: 25-50% electricity
- Three grid 50-75% electricity
- Four grid: 75-100% electricity
- Fully charged: the indicator light is long on
- Shutdown: red light flashes 3 times remaining
Bluetooth pairing
- When the headset is off, long press the Snitch button.Until the headset Bluetooth function turns on successfully The prompt. At this time, the headphone indicator light appears blue red light flashing alternately.
- Open the Bluetooth device to search the headset model gAl2″ and click the headset model Pairing. When the pairing is successful, there will be a prompt sound. After the connection is successful, there will be no flashing light.
- In the power on state, if the headset is not connected for 5 minutes, it will automatically shut down.
Connect two mobile phones at the same time
- Complete the pairing connection of the first cell phone according to the above Bluetooth pairing operation, and than turn off the first cell phone Bluetooth in a mobile phone.
- Complete the matching of the second mobile phone in the same way. A mobile phone Bluetooth function is turned on and click on the sA1 2° device connection again.
The keys operation
- Boot: long press the Switch button for 2 seconds.
- Shutdown: long press the Switch button for 3 seconds.
- Answer the call: press the function button When the call came.
- Hang up the phone: press the function button during the call.
- Refuse to listen to the phone: Hold the function button for 1 second When the call came
- Play pause: Press the function button when you listen to the song
- Previous song: When listening to the song, press 1 second +The keys
- Next song: When listening to the song, press 1 second — The
- keys Increase the volume: press + button during work
- Decrease the volume: press the — button while working
- Tail number redial: press the function key twice while working
- Call Siri: Connect your phone and click C key
- TF card/Bluetooth mode switch: Double click C button when inserting TF card
- Power prompt: click the switch button and the power display light will be on for 5-20 seconds and then go off (Display time varies in different modes).
Warranty description
Warranty period
12 months from the date of purchase.
Free Service
In the warranty period, if the product quality of the fault, please use this manual and shopping vouchers to contact the dealer to enjoy free maintenance.
The following conditions are not subject to warranty:
- The product maintenance label has been damaged;
- Damage caused by self—dismantling;
- Faults caused by water ingress or fall and considered to be mechanical damage;
- Malfunctioning or damaged by force majure.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>