JOOM D18 Wireless Remote Control Fishing Bait Boat Instruction Manual
- June 5, 2024
- JOOM
Table of Contents
JOOM D18 Wireless Remote Control Fishing Bait Boat
Accessories Introduction
Motor
turn radiusturn radius 0.8-1.OM
Battery
power: 7.4V 5200AH, free maintain the battery, lasting time is above 2 hours alarm: the low battery is with the alarm setting to ensure the safe back.
Night Light
the night light can help fish-men to distinguish the direction and seduce the fish
Remote Controller
remote control distance above 300M
Boat Body
direction: forward, back, right and left turn, release the bait control flexibly and precisely, can resist the wave about 3-4 level.”
Features Introduction
Best Quality
The boat adopts the ABS which is without the poison and smell, the ABS is strong anti-resistant, and abrasion-resistant and the boat color can be kept for a long time. It is easy to clean as the ABS can beats the chemical pollution.
Professional Digital Full Automatic FM Device
It can solve the phenomenon: interference of a few boats sailing; a short distance of remote controlling: out of control to pick up the boat.
Resistant the Strong Wind and Wave
Two motors design, it is with the waterproof function. It can stop the boat from the water, the boat can run well and normally under 5 class wind.
Long Time Lasting
Simple operation, stability is strong, change the speed and direction freely.
Charging fastly
Two bins design
- Every bait bin can be controlled independently.
- The night light is designed in blue color.
Functions
- can help know the direction during the night fishing.
- lure the fish.
- loading weight above 1kg.
Remote Controller Matches to the Boat:
Switch the power of the boat’ switch the power of the remote controller, press the learning button long time enough, and hear the voice of the “be” which indicates that the matching the signal is going on.” switch the power of the receiver, and the LED indicator of the receiver is flashing, this means the matching is successful.
Normal Remote Control Mode:
Using the rocker control the motor. Rocker up and down adjusts the motor forward, backward, and rotation speed. Left and right adjust the motor straightly, there are two kinds of circumstance as follows: The rocker is in the middle of the up and down position, and the boat is at the state of the stopping. The rocker is to the left or right, and the left or the right motor stops turning. The left or right motor is from 0% ( the motor can drive the ship at the minimum speed) to 100% speed rotation, it is mainly used for spiraling. .When the rocker is up or down, the left and right motors will rotate from 0% to 100%, at this time, the left and right motors will adjust the rotation speed slightly if the rocker is left or right. For example, when the rocker is in the middle, push up the rocker to the 80% position, and the left and right motor speed is at 80%. The right motor speed is still 80% if the rocker is shifted to the right slowly, and the left motor speed can be adjusted from 80% to 0%, this operation is mainly for controlling yaw.
Constant Speed Cruise Mode:
When the remote control bait boat moves forward or backward, press the cruise button on the remote controller, release the rocker, and the boat will run at the current speed. When the boat is in stopping mode, the cruise button is without any function. When in constant speed cruise mode, can adjust the left and right motor speed under moving the rocker to the left or right. For example: pull the rocker to the left, then the right motor speed will be increased by 1, press and hold the rocker, when the right motor speed increases to the maximum, there is no way to increase the speed, the left motor speed will be decreased by 1. The cruise mode will be removed by pressing the cruise button.
Voltage Indication:
The LED on the remote controller will flash slowly which is showing the low battery voltage of the remote controller when the voltage of the remote controller is lower than 2.3v.
Instruction on the battery usage and charging
- Main Battery (Standard)
- The machine has a set of batteries built-in.
- Charging interface
- When in use, the battery storage interface can be docked.
- Standby battery interface (the standby battery should be bought separately)
Ergonomic remote control handle
- Streamline boat body
- 7.2V 5200mA high capacity battery
Maintenance
Controller
- please kindly take out the battery if there is a long time for leaving unused.
Motor
- Check the motor for debris after each use.
Boat Body
- please keep dry and clean for the boat after using the boat.
- please take out the battery and keep it well if do not use the boat.
- please do not put the boat with the corrosive liquid.
- Do not close to the high-temperature target.
- please put the boat into the bag to keep the boat from the dust if do not use the boat.
SPECIFICATION
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This devicemay not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.