JOOM TX16 Optical Fiber Bluetooth Receiver/Transmitter User Guide
- June 6, 2024
- JOOM
Table of Contents
Welcome to use TX16 Optical Fiber Bluetooth receiver/ transmitter
Product overview:
TX16 is a 3. 5mm Bluetooth transmitter-receiver Bluetooth adapter with a 3. 5mm optical fiber. It can connect two devices at the same time. When it is used as a Bluetooth transmitter, it can wirelessly transmit music from mobile, Walkman, TV, computer and other devices to your Bluetooth receiver, stereo Bluetooth headset, Bluetooth speaker, etc.
When it is used as a receiver, it is used as a Bluetooth stereo headset (only
by inserting the earphone wire into the 3.5mm interface) or by connecting with
the speaker, the power amplifier device through the audio cable, so as to
realize the wireless Bluetooth transmission and playback of audio signals on
the mobile phone or computer. Note: Please charge it fully before using TX16.
Product picture and function introduction
Picture:
A: Multifunction key
B: Mode selection switch (TX: transmit. RX: receive)
C: Interface selector switch (AUX:3.5mm audio interface.SPDIF: optical fiber
interface)
D: 3.5 Audio interface (audio input / output)
E: Optical fiber input interface
F: Optical fiber output interface
G:Micro 1)58 charging port
H: interface indicator,
I: matching lamp,
J: power indicator lamp
Product specification:
Name: TX16
Bluetooth version: V4.1 Class II
Bluetooth chip: CSR BC8670
Scope of frequency: 2.402GHZ-2.480GHZ
Bluetooth Protocol: RX: A2DP AVRCP TX:A2DP
Launch mode: support (connect two Bluetooth speakers or headphones
simultaneously, using a code)
Receive mode: support (one drag and two functions, including two mobile
phones)
Codec: sort TX: preferred APT-X, second: SBC, third: APTX-LLL, 4th:
FastStreamRX:SBC
The APTX uses note: the APT – X 48KHZ codec ( headset or speaker must also
support APT – X) when single connection will automatically switch the SBC
CODEC if it is a dual connection.
Battery specification: 350MA rechargeable lithium battery Charging Power
supply: 110-240V AC Adapter 5VDC > 300ma
Wor temperature: -10°C-55°C
Working hours: AUX: 15 hours SPDIF:12 hours
Net weight:
Size: 606020mm
Function introduction:
Launch mode:
1. TX16 selects launch mode/receive mode switch by toggle switch. Check to
see if it is in “TX” mode before switching on. Select toggle switch to select
AUX or SPDIF IN to connect to TV/computer. The TV or computer must be set to
external speaker mode.
2. When TX16 turns on, the interface light will light on, the Bluetooth pair
lights flicker and enter the Bluetooth search mode. Turn on the
receiver/Bluetooth headset/Bluetooth speaker to enter the matching state. TX16
will automatically select the searched Bluetooth connection for pairing. If
successful connection, the light will light long. Then can achieve audio
transmission.
3. When need to connect to the second device, click the multifunction button.
Another LED light flashes and goes into search mode. Automatically search for
Bluetooth receiving device to connect, the light is long after the connection
is successful.
4.Press twice the multifunctional buttons to reset, clear and reconnect.
5.The second use of the product will only need to use the product at the same
time, can be back-connected.
Receive mode:
1. TX16 selects toggle mode/receive mode switch by toggle switch. Check to
see if you are in “: RX” mode before switching on. Select AUX or SPDIF OUT to
connect the speaker by toggle switch.
2. Switch on TX16, the interface lights, red and blue lights flashing
alternately, enter the matching state, open the phone or flat Bluetooth,
search Bluetooth “TX16”, click on the connection. The light is long after the
connection is successful.
3. When need to connect to a second phone, just search for Bluetooth “TX16”
directly or on a tablet. Click on the connection.
4. Press twice the multifunction key to reset, clear and reconnect.
5.The second use of the product will only need to use the product at the same
time, can be back-connected. Note: the toggle switch can choose the mode at
any time when the switch is turned on. Should not be too frequent to choose.
Speical reminder:
1. TX16 will turn off automatically when the battery voltage is less than
3.1V.
2. In the case of unpaired equipment, the machine will automatically shut
down after 5 minutes of boot.
3. If need to use it for a long time, you can connect the power line DCSV and
use it while charging. The low voltage of the battery or the use of the
battery during charging may lead to the sound of current.
4. When using TX16, if prompted for a pairing password, enter “0000”.
Packaging accessories:
1. TX16 machine 1
2. Optical fiber line 1
3. Audio line 1
4. Charging line 1
5. Instructions *1
Warning statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.