FORTIN 2023 Toyota Hybrid Push to Start Installation Guide

FORTIN 2023 Toyota Hybrid Push to Start

REGULAR INSTALLATION

COMFORT GROUP ACTIVATION: Program remote starter option for

NOTES

• The vehicles OEM remote and SmartKey are still operable during remote start.

MANDATORY INSTALL

HOOD PIN HOOD STATUS: THE HOOD PIN SWITCH (INCLUDED)  MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.

SECURITY STICKER

WARNING

• Included

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

• Parts required (Not included) 3X 1 Amp. Diodes

WIRING CONNECTION

DCRYPTOR PROGRAMMING PROCEDURE

1. Press and hold the programming button: Connect the 6-PIN Main harness (White connector).
   • The LEDs will alternate between BLUE, RED,YELLOW & BLUE/RED flashes.
2. Release the programming button when the LED is BLUE.
3. If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.
4. Insert the required remaining connectors.
5. Press the Push-to-Start button twice, to turn the ignition ON.
   • The BLUE LED will flash rapidly.
6. Press the Push-to-Start button once to turn the ignition OFF.
   • The BLUE LED continues to flash rapidly.
   • Press the Unlock button on the vehicle OEM remote.
   • The BLUE LED will turn ON solid.
7. Press the foot-brake pedal.
8. Press the Push-to-Start button until the engine start.
9. Release the foot-brake pedal.

  * The BLUE LED will turn OFF.
  * The RED LED will turn ON.![FORTIN-2023-Toyota-Hybrid-Push-to-Start-FIG-16](https://manuals.plus/wp-content/uploads/2024/08/FORTIN-2023-Toyota-Hybrid-Push-to-Start-FIG-16.png)

8. Press the Push-to-Start button once to turn off the engine.

   • Press the foot brake pedal.

9. Press the Push-to-Start button until the engine starts.

   • The RED LED will turn OFF.

   • The YELLOW LED will turn ON.
     Wait,

   • The RED and YELLOW LEDs will alternate.

   • Release the foot brake pedal.

10. Press the Push-to-Start button once to turn off the engine.

11. Disconnect all connectors and after the 6-pin (Main-Harness) or the 4-pin Data-link connector.

12. Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.

    • Parts required (not included)

13. AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-pin (Main-Harness) or the 4-pin (Data-Link) connector and after all the remaining connectors.

REMOTE STARTER

The module is now programmed.

Test the remote starter. Remote start the vehicle.

REMOTE STARTER PROGRAMMING PROCEDURE

• REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Remote start the vehicle.
  • Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity of remote
• Enter the vehicle with the SMART-KEY.
• DO NOT PRESS THE
• BRAKE PEDAL. Press and release the Push-to-Start button once.
• Press the brake pedal.
• The vehicle can now be put into gear and driven.
• If the Smart-Key is not detected the vehicle will shut down.

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever of the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or in any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT

• Tél: 514-255-HELP (4357)
• 1-877-336-7797
• www.fortinbypass.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>