FORTIN 2019-2024 Push to Start Lexus Installation Guide
- August 19, 2024
- FORTIN
Table of Contents
FORTIN 2019-2024 Push to Start Lexus
Product Specifications
- Model: EVO-ALL
- Vehicle Compatibility: Lexus UX250H, Push-to-Start, 2019-2024
- Firmware Version: 79.[66]
- Compatible Module Required: QR Code on the Label
- Manufactured After: 2019
Product Usage Instructions
Installation and Setup
- Ensure the vehicle’s hood pin switch is installed for proper functionality.
- Connect the necessary wiring based on the provided wiring connection guide.
- Program the bypass options using the specified unit options.
- Update firmware versions and options using the Flash Link Updater or Flash Link Mobile tool (sold separately).
Operation
- Use the OEM remote monitoring system for various functions such as lock, unlock, arm, disarm, etc.
- Ensure the hood status is correctly set depending on the vehicle’s configuration.
- The module allows for push-to-start functionality on compatible vehicles.
- Always follow safety guidelines and have the module installed by a qualified technician.
FAQ
- Q: Is the installation of the hood pin switch mandatory?
- A: Yes, the hood pin switch is essential for proper operation and security. It must be installed if the vehicle can be remotely started with the hood open.
- Q: Can I update the firmware version without the Flash Link Updater or Flash Link Mobile tool?
- A: No, to update the firmware version and options, you need to use the specified tools sold separately.
Vehicle functions
REGULAR INSTALL
NOTES
- The vehicles OEM remote and SmartKey are still operable during remote star
NO KEY TAK
- Parts required (Not included)
- 1X Diode
MANDATORY INSTALL
HOOD PIN
- HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.
Notice: the installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.
- THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
WIRING CONNECTION
DCRYPTOR PROGRAMMING PR
KEY BYPASS PROGRAMMING PROCEDURE 2/2
REMOTE STARTER FUNCTIONALITY
Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever on the accuracy or currency of the information
supplied. The installation in every case is the sole responsibility of the
installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no
liability or responsibility whatsoever resulting from any type of
installation, whether performed properly, improperly or in any other way.
Neither the manufacturer nor distributor of this module is responsible for
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by a qualified technician. The information supplied is a
guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
CONTACT
TECH SUPPORT
- Tel: 514-255-HELP (4357)
- 1-877-336-7797
- www.fortinbypass.com
Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>