FORTIN 81581 Immobilizer Bypass Installation Guide

: August 19, 2024
: FORTIN

Table of Contents

FORTIN 81581 Immobilizer Bypass
Product Information
Product Usage Instructions
FAQ
Vehicle functions
Parts required
MANDATORY INSTALL
DESCRIPTION
WIRING CONNECTION
PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FORTIN 81581 Immobilizer Bypass

Product Information

Specifications

Product Name: Immobilizer Bypass
Compatible Vehicles: KIA Niro Hybrid Push-to-start 2017-2021
Firmware Version: 76.[60]
Parts Required (Not Included): 2X Diodes 1 Amp

Product Usage Instructions

To add the firmware version and options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Note: This module must be installed by a qualified technician to avoid permanent damage to the vehicle.
Hood Status: The hood pin switch must be installed for security reasons. If the vehicle can be remotely started with the hood open, set function A11 to OFF.
Refer to the wiring connection guide below for proper installation:
- A15 (-) Hood IN RS8
  - A14 (-) Hand Brake IN RS9
  - A13 (-) Trunk Release OUT RS11

FAQ

Q: Is the hood pin switch included in the package?
A: No, the hood pin switch is not included. It must be purchased separately and installed for proper functionality.
Q: Can I install the Immobilizer Bypass module myself?
A: It is highly recommended to have the module installed by a qualified technician to prevent any damage to the vehicle due to incorrect connections.

Vehicle functions

REGULAR INSTALLATION

Parts required

Parts required (Not included)

2X Diodes 1 Amp

MANDATORY INSTALL

HOOD PIN

HOOD STATUS: THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE-STARTED WITH THE HOOD OPEN, AND SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements is mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

PROGRAMMING PROCEDURE

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our website regularly. We recommend that you update this module to the latest firmware and download the latest installation guide(s) before the installation of this product.

www.fortinbypass.com

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer-safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever for the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly, or in any other way. Neither the manufacturer nor distributor of this module is responsible for damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by a qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.