NKOK 81441, 81442 Full Function Radio Control Vehicle Instruction Manual

NKOK 81441, 81442 Full Function Radio Control Vehicle

Product Information

Specifications

• Battery: 7.4V
• Charger: USB Charger
• Age Recommendation: 6+

Product Usage Instructions

Charging the Battery Pack

1. Insert the supplied 7.4V battery pack securely into the charger as shown.
2. Plug the charger into a standard USB power source (only use the included USB charger to charge the battery pack).
3. Allow the battery pack to charge for a minimum of 3 hours on the initial two charges. Subsequent charges require approximately 2.5 hours. (Red light blinks while charging/Light turns off when the charge is complete)
4. Remove charger and battery from outlet. Unplug the battery pack from the charger by depressing the catch on one side of the connector, and gently pulling the plug halves apart.

NOTE:
Battery Pack will become warm after charging or during use. Make sure to allow the Battery Pack to cool before recharging. Charging a warm Battery Pack will greatly reduce its life. Do not overcharge the battery pack which may result in battery failure.

Battery Safety Information
Parents should periodically examine the battery charger & battery pack for potential hazards. Any potentially hazardous parts need to be repaired or replaced.

FAQ

• How do I pair the transmitter with the vehicle?
  Turn on the transmitter. A red LED will blink while searching for a vehicle. Turn on the vehicle. Red LED will turn solid (pairing successful).

• How do I operate the vehicle?
  For operating instructions for the vehicle, please refer to the operator’s manual provided with the product.

If you have questions or difficulty operating this toy

• DO NOT RETURN IT TO THE STORE
• Call us Toll-Free: 888-656-5869
• Monday – Friday between 10:00 am – 4:00 pm Pacific Standard Time or email us at: customerservice@nkok.com.

WARNING:!

• CHOKING HAZARD-Small parts.
• Not for children under 3 years.

Retain the packaging and manual for future reference as they contain important information.

Battery Installation

1. Top of Chassis
2. Bottom of Chassis
3. Back of Seat

Includes

1. Vehicle
2. USB Battery Charger
3. 7.4V Li-ion Battery Pack
4. 2 x 1.5V LR03/R03/AAA Batteries
5. Transmitter
6. Operator Manual

How to Use

Skis

Included:

• 2x Regular Skis
• 2x Skis with Wheels

Roller Skis for Hard Surfaces

Basic Skis for Terrain Surface

Transmitter

Top View

GENERAL BATTERY SAFETY INFORMATION

Read and follow operating instructions.

1. Do not mix old and new batteries.
2. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
3. Only batteries of the same or equivalent type as recommended are to be used.
4. Batteries are to be inserted with the correct polarity.
5. Exhausted batteries are to be removed from the product.
6. The supply terminals are not to be short-circuited.
7. Non-rechargeable batteries are not to be recharged.
8. Rechargeable batteries are to be removed from the product before being charged.
9. Rechargeable batteries are only to be charged by an adult.
10. Dispose of battery(ies) safely.
11. Do not dispose of this product in a fire. The batteries inside may explode or leak.
12. Batteries should be changed by adults only.
13. Wires are not to be inserted into socket outlets.
14. Only charge using the provided USB charger cable.

HOW TO PAIR
Turn on the transmitter. A red LED will blink while searching for a vehicle. Turn on the vehicle. Red LED will turn solid (pairing successful).

VEHICLE OPERATION

• Any of the following conditions may interfere with the behavior and function. The transmitter signals can easily be interrupted. Improper handling may hamper the performance of the vehicle.
• (Run time is Approximately 12-15 min., Approximately operating distance range 150ft., Approximately top speed of 10mph)

SAFETY PRECAUTIONS

Remember to avoid water, heat, sand, and high impact!

1. Read the operating manual thoroughly before playing.
2. Users should keep strict accordance with the instruction manual while operating the product.
3. Keep vehicles away from wet surfaces or rain.
4. Avoid collision on hard surfaces.
5. Do not operate your vehicle on the streets.
6. Turn off the transmitter/charger and the toy when not in use.
7. Remove batteries from the transmitter/vehicle when not in use.
8. Only use the included USB charger to charge the battery pack.

This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

IMPORTANT!
7.4V battery pack is NOT fully charged before shipping and must charged 3 hours before the first and second use.

1. Insert the supplied 7.4V battery pack securely into the charger as shown.
2. Plug the charger into a standard USB power source (only use the included USB charger to charge the battery pack).
3. Allow the battery pack to charge for a minimum of 3 hours on the initial two charges. Subsequent charges require approximately 2.5 hours. (Red light blinks while charging/Light turns off when the charge is complete)
4. Remove charger and battery from outlet. Unplug the battery pack from the charger by depressing the catch on one side of the connector, and gently pulling the plug halves apart. (Fig. 1)

NOTE:
Battery Pack will become warm after charging or during use. Make certain to allow the Battery Pack to cool before recharging. Charging a warm Battery Pack will greatly reduce its life. Do not overcharge the battery pack which may result in battery failure.

ATTENTION PARENTS:

• The battery charger & battery pack need to be periodically examined for potential hazards.
• Any potentially hazardous parts need to be repaired or replaced.

FCC STATEMENT

CAUTION:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003. Conforms to ASTM F963 standard.

Basic Trouble Shooting

Problem: The vehicle will not pair with the transmitter.The
The red LED on the transmitter blinks while searching for a vehicle. It will turn solid once paired successfully. If the transmitter and vehicle are unable to pair after 30 seconds, turn both items off and try the pairing procedure again. If pairing is still unsuccessful, try the troubleshooting procedures below:

Problem: The vehicle will not start.

• The power switch is off. Turn on the switch.
• The battery pack is installed, and ensure battery pack is properly connected.
• The battery pack is drained. Recharge the battery pack.

Problem: The vehicle does not respond to controls.

• The transmitter battery is drained. Replace with new batteries.
• The vehicle is out of range. Bring the transmitter closer to the vehicle.
• Interference with the surrounding area. Move to a better location to operate the vehicle.

RF Exposure Requirement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

References

• Radio Control | Nkok

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>