NKOK 81861 Full Funcion Radio Control Vehicle User Manual
- June 16, 2024
- NKOK
Table of Contents
NKOK 81861 Full Funcion Radio Control Vehicle
Product Information
Specifications
- Item#: 81861
- Description: Mean Machines – Low Cost R/C
- AVC#: AVC81861-7-111723-V1.2
- Spec. List Dims: 17.69L x 8.5H
- Stage: Instruction Manual
- Designer: E. Gomez
FAQ
Problem – Vehicle will not START
If your vehicle is not starting, please try the following troubleshooting steps:
- Make sure the batteries in both the vehicle and transmitter are properly installed and fully charged.
- Check if the ON/OFF switch on the vehicle is turned on.
- Verify that there are no signal interruptions between the transmitter and the vehicle.
Problem – Vehicle does not respond to controls
If your vehicle is not responding to controls, please try the following troubleshooting steps:
- Check if the batteries in both the vehicle and transmitter are properly installed and fully charged.
- Ensure that there are no signal interruptions between the transmitter and the vehicle.
- Refer to the operator’s manual for instructions on pairing the transmitter with the vehicle.
Product Usage Instructions
Safety Precautions
Before using the product, please read and follow these safety precautions:
- Avoid water, heat, sand, and high-impact collisions.
- Read the instruction manual thoroughly before playing.
- Users must strictly follow the instructions in the manual during operation.
Battery Safety
Please note the following general battery safety information:
- Make sure to use the correct type and size of batteries specified by the product.
- Do not mix old and new batteries or different types of batteries.
- Remove batteries from the product when not in use for an extended period.
- Do not dispose of batteries in fire, as they may explode.
Vehicle Operation
To operate the vehicle, follow these steps:
- Make sure the vehicle is on a flat surface and free from any obstacles.
- Turn on the vehicle using the ON/OFF switch located on the vehicle.
- Use the transmitter to control the vehicle’s movement. Refer to the operator’s manual for detailed instructions on using the transmitter.
- Avoid interfering conditions such as signal interruptions or improper handling, as they may affect the performance of the vehicle.
WARNING
- CHOKING HAZARD — Small parts.
- Not for children under 3 years.
Retain the packaging and manual for future reference as they contain important information.
Battery Installation
Vehicle
Transmitter
GENERAL BATTERY SAFETY INFORMATION
Read and follow operating instructions
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the product.
- The supply terminals are not to be short-circuited.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the product before being charged.
- Rechargeable batteries are only to be charged by an adult.
- Dispose of battery(ies) safely.
- Do not dispose of this product in a fire. The batteries inside may explode or leak.
- Batteries should be changed by adults only.
VEHICLE OPERATION
- Any of the following conditions may interfere with the behavior and function.
- The transmitter signals can easily be interrupted.
- Improper handling may hamper the performance of the vehicle.
SAFETY PRECAUTIONS
Remember to avoid water, heat, sand and high impact!
- Read the operating manual thoroughly before playing.
- Users should keep strict accordance with the instruction manual while operating the product.
- Keep vehicle away from wet surfaces or rain.
- Avoid running on thick carpet or dusty floors.
- Avoid collision on hard surfaces.
- Keep vehicle away from Sandy and Dusty areas.
- Do not operate your vehicle on the streets.
- Turn off the transmitter/vehicle and the toy when not in use.
- Remove batteries from transmitter/vehicle when not in use.
SPECIFICATIONS
- Item#: 81861-7
- Description: Mean Machines – Low Cost R/C IM
- AVC#: AVC81861-7-111723-V1.2
- Spec. List Dims: 17.69”L x 8.5”H
- Stage: Instruction Manual
- Date: 11.17.23
- Designer: E. Gomez
FCC STATEMENT
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
**This device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference
- this device must accept any interference, including interference that may cause undesired operation of the device.
The device is compliance with RF field strength limits, users can obtain
Canadian information on RF exposure and compliance.
This Class B digital apparatus complies with Canadian ICES-003. Conforms to
ASTM F963 standard.
RF Exposure Requirement
- The device has been evaluated to meet general RF exposure requirement.
- The device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
More Information
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
©2023 NKOK, Inc. Irwindale, CA 91706, USA.
www.nkok.com
customerservice@nkok.com
Made in China.
AVC81801-7-111723-V1.2
If you have questions or difficulty operating this toy
DO NOT RETURN IT TO THE STORE
Call us Toll-Free: 888-656-5869
Monday – Friday between 10:00am – 4:00 pm Pacific Standard Time or email us
at: customerservice@nkok.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>