NKOK 761 Full Function Radio Control Vehicle Instruction Manual
- June 13, 2024
- NKOK
Table of Contents
NKOK 761 Full Function Radio Control Vehicle
Battery Installation
Vehicle Includes:
- lx Vehicle
- lx Transmitter
- lx Operator Manual
Transmitter
GENERAL BATTERY SAFETY INFORMATION
Read and follow operating instructions.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the product.
- The supply terminals are not to be short-circuited.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the product before being charged.
- Rechargeable batteries are only to be charged by an adult.
- Dispose of battery(ies) safely.
- Do not dispose of this product in a fire. The batteries inside may explode or leak.
- Batteries should be changed by adults only.
HOWTO PAIR
Turn on transmitter. Red LED will blink while searching for vehicle. Turn on
vehicle. Red LED will turn solid (pairing successful).
VEHICLE OPERATION
Any of the following conditions may interfere with the behavior and function.
The transmitter signals can easily be interrupted.
Improper handling may hamper the performance of the vehicle.
SAFETY PRECAUTIONS
Remember to avoid water, heat, sand and high Impact!
- Read the operating manual thoroughly before playing,
- Users should keep strict accordance with the instruction manual while operating the product.
- Keep vehicle away from wet surfaces or rain.
- Avoid collision on hard surfaces.
- Do not operate your vehicle on the streets.
- Turn off the transmitter and the toy when not In use.
- Remove batteries from transmitter/vehicle when not in use.
This symbol o n the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, It Is ycur responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
CAUTION:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits far a □ass B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and. If not Installed and used In accordance with the Instructions, may cause harmful Interference to radio communications. However, there Is no guarantee that Interference will not occur In a particular Installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver Is connected.
- Consult the dealer or an experienced radio/TV technician for help.
**This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada license-exempt RSS standard(s). Ope@tion is subject to the following two conditions: (l) this device may not cause interference, and (2) this device must accept any interference. including interference that may cause undesired operation of the device. The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance. This Class B digital apparatus complies with Canadian ICES-003. Conforms to ASTM F963 standard.
Basic Trouble Shooting
- Problem: Vehicle will not pair with transmitter.
- Red LED on transmitter blinks while searching for vehicle. It will turn solid once paired succesfully. If transmitter and vehicle are unable to pair after 30 seconds, turn both items off and try pairing procedure again. If pairing still unsuccessful, try the trouble shooting procedures below:
- Problem: Vehicle will nat start.
- Power switch is off. Turn on the switch.
- Batteries are Installed with Incorrect polarities. Check the + and – markings to ensure batteries are properly aligned.
- Batteries are drained. Replace with new set of alkaline batteries.
- Rusty contacts. Clean terminals with sandpaper.
- Problem: Vehicle daas nat raspand ta controls.
- Transmitter battery is drained. Replace with new batteries.
- Vehicle is out of range. Bring transmitter closer to the vehicle.
- Interference with the surrounding area. Move to a better location to operate the vehicle.
Declaration of Conformity
Hereby, NKOK, Inc., declares that this radio control toy is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
The full test of the EU declaration of conformity is available at the
following internet address: www.nkok.com/doc
Frequency band: 2417·247OMHz
EIRP Power: -3.99dBm
Name of manufacturer: NKOK, Inc., 5354 lrwlndale Ave. Unit A, Irwindale,
CA 91706
Contact person:
safetycompliance@nkok.com
RF Exposure Requirement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any Interference received, Including Interference that may cause undesired operation.
If you have questions or difficulty operating this toy
DO NOT RETURN IT TO THE STORE
call us Toll-Free: 888-656-5869
Monday – Friday between 10:00am – 4:00 pm Pacific Standard Time or email us
at: customerservice@nkok.com
WARNING :
CHOKING HAZARD – Small parts,
Not for children under 3 years
Retain the packaging and manual for future reference as they contain i mportant information.
©2023 NKOK, Inc. Irwindale, CA 91706, USA.
www.nkok.com –
customerservice@nkok.com
Made in China. Fabrique en Chine. Hecho en China.
AVC761-7Dl123-Vl .3