SILVERCREST 444780_2307 Stylish Hair Dryer with Over Heat User Manual
- August 17, 2024
- SILVERCREST
Table of Contents
SILVERCREST 444780_2307 Stylish Hair Dryer with Over Heat
Product Specifications:
- Brand: OWIM GmbH & Co. KG
- Model: IONIC HAIR DRYER SHTD 2200 E4
- Model Number: IAN 444780_2307
Introduction:
The IONIC HAIR DRYER is designed to provide efficient hair drying and
styling with the benefits of ionization technology.
General Safety Instructions:
- Read the user manual carefully before use.
- Avoid using the hair dryer near water to prevent electric shock.
- Do not block the air inlets or outlets during operation.
First Use:
Before using the hair dryer for the first time, ensure all packaging materials
are removed. Plug in the hair dryer to a suitable power outlet.
Operation:
- Drying Hair: Adjust the heat and speed settings as desired and gently move the hair dryer over your hair until dry.
- Ionization Mode: Activate the ionization mode for smoother and shinier hair.
- Styling Hair: Use the hair dryer along with styling tools for desired hair styling.
- Cleaning and Maintenance:
Regularly clean the housing, concentrator nozzle, protection grid, and air inlet to ensure optimal performance and longevity of the hair dryer.
Storage:
Store the hair dryer in a cool, dry place away from direct sunlight when not
in use.
Disposal:
Follow local regulations for proper disposal of the hair dryer at the end of
its lifespan.
Warranty:
Refer to the warranty information provided in the user manual for details on
coverage and claim procedures.
FAQ:
Q: Can I use the hair dryer on wet hair?
A: It is recommended to towel-dry your hair before using the hair dryer
to prevent damage.
Q: How often should I clean the air inlet?
A: It is advised to clean the air inlet regularly, at least once a month,
to maintain proper airflow.
List of pictograms used
The following warnings are used in this user manual and on the packaging:
IONIC HAIR DRYER
Introduction
We congratulate you on the purchase of your new product. You have chosen a
high quality product. The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please familiarise yourself with
all of the safety information and instructions for use. Only use the product
as described and for the specified applications. If you pass the product on to
anyone else, please ensure that you also pass on all the documentation with
it.
Intended use
This product is designed to dry and style human hair. The product must not be
used on artificial or animal hair. Do not use the product for any other
purpose.
This product is only intended for private household use, not for commercial
purposes.
The manufacturer accepts no liability for damages caused by improper use.
Scope of delivery
After unpacking the product, check if the delivery is complete and if all parts are in good condition. Remove all packing materials before use.
- 1x Ionic hair dryer
- 1x Concentrator nozzle
- 1x User manual
Parts list
- LED
- Air inlet
- Protection grid
- (Ion switch)
- Hanging loop
- Power cord and power plug
- (Air flow switch)
- (Heat control switch)
- (Cooling mode button)
- Air outlet
- Concentrator nozzle
Technical data
- Input voltage: 220–240 V∼, 50–60 Hz
- Power consumption: 2200 W
- Protection class: II
- HG09937A: Black
- HG09937C: Blue
General safety instructions
BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY
INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS,
PLEASE ALSO INCLUDE ALL THE DOCUMENTS!
In the case of damage resulting from non-compliance with these operating
instructions the warranty claim becomes invalid! No liability is accepted for
consequential damage! In the case of material damage or personal injury caused
by incorrect handling or non-compliance with the safety instructions, no
liability is accepted!
Children and persons with disabilities
WARNING! RISK OF LOSS OF LIFE OR ACCIDENT TO INFANTS AND CHILDREN!
Never leave children unsupervised with the packaging material. The packaging
material represents a danger of suffocation. Children frequently underestimate
the dangers. Always keep children away from the packaging material.
- This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.
- Children shall not play with the product.
- Cleaning and user maintenance shall not be made by children without supervision.
Intended use
WARNING! Misuse may lead to injury. Use this product solely in accordance with these instructions. Do not attempt to modify the product in any way.
Electrical safety
DANGER! Risk of electric shock! Never attempt to repair the product yourself.
In case of malfunction, repairs are to be conducted by qualified personnel only.
WARNING!
-
Risk of electric shock!
Do not immerse the product in water or other liquids. Never hold the product under running water. -
Risk of electric shock!
Never use a damaged product. Disconnect the product from the power supply and contact your retailer if it is damaged.- Before connecting the product to the power supply, check that the voltage and current rating corresponds with the power supply details shown on the product’s rating label.
- Regularly check the power plug and the power cord for damages. If the power cord is damaged,it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Protect the power cord against damages. Do not let it hang over sharp edges, do not squeeze or bend it. Keep the power cord away from hot surfaces and open flames.
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
- The use of extension cords is not recommended. If the use of an extension cord is necessary, it must be designed for a current flow of at least 10 A. Lay cords in such a way that they may not be tripped over or otherwise damaged.
Operation
WARNING! Risk of electric shock! Do not use this product near bathtubs, showers, basins or other vessels containing water.
- The product must not be left unattended while it is connected to the supply mains.
- Do not operate the product with wet hands or while standing on a wet floor. Do not touch the power plug with wet hands.
- Do not pull the power plug out of the electrical outlet by the power cord. Do not wrap the power cord around the product.
- Protect the product, its power cord and power plug against dust, direct sunlight, dripping and splashing water.
- Switch off the product before
- changing attachments,
- cleaning,
- disconnecting the product from the power supply.
- When the product is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the product is switched off.
First use
- Remove the packaging. Check if all parts are complete.
NOTE: The product may give off some odour during first use. These are production or transport residue that will quickly subside.
Operation
Drying hair
(Fig. A)
- Connect the power plug [6] to a suitable electrical outlet.
- Select the desired air flow and heat levels:
- After use: Select [7] to switch off the product.
Disconnect the power plug [6] from the electrical outlet.
Ionization mode
(Fig. B)
NOTE: Remove the concentrator nozzle [11] before using the ionization mode. This optimises the ionization performance. Use strong air flow ( [7]) and high heat level ( [8]) in ionization mode to dry hair quickly.
Styling hair
Using the concentrator nozzle
- Put the concentrator nozzle [11] on the air outlet [10].
- Rotate the concentrator nozzle [11] to change the position.
- Switch on the product. Use the concentrator nozzle [11] to direct the air flow onto a specific section of the hair.
NOTE: We recommended to use gentle air flow ( [7]) and low heat level ( [8]) when styling hair.
CAUTION! Do not touch and remove the concentrator nozzle [11] when it is still hot.
Cooling mode
Use the cooling mode to make the hairstyle last longer:
NOTES:
The cooling function ( [9]) does not work when the heat level is set to “no
heat” ( [8]).
When the product fails to function, switch off and disconnect the product from
power. Let the product to cool.
Cleaning and maintenance
DANGER! Risk of electric shock! Always switch off the product and disconnect the power plug [6] from the electrical outlet before cleaning the product.
WARNING! Do not immerse the product’s electrical components in water or other liquids.
Never hold the product under running water.
CAUTION! Do not use corrosive or abrasive cleaning agents or material to clean the product.
- Cleaning the housing and the concentrator nozzle
- Remove the concentrator nozzle [11] from the air outlet [10].
- Wipe the housing and the concentrator nozzle [11] with a slightly damp cloth. For stubborn soiling, wipe with a light detergent on the cloth. And dry all parts thoroughly.
- Cleaning the protection grid and the air inlet
- Hold the handle of the product. Rotate the protection grid [3] in a counterclockwise direction.
- Remove the protection grid [3] from the air inlet [2] (Fig. C).
- Clean the protection grid [3] and the air inlet [2] with a dry cloth.
- Attach the protection grid [3] back onto the air inlet [2].
- Rotate the protection grid [3] in a clockwise direction to securely attach it onto the air inlet [2].
Storage
Store the product at a cool, dry place, protected from moisture and out of the
reach of children.Store the product in the original packaging when it is not
in use.
Alternatively, the product can also be hung on its hanging loop [5].
Disposal
The packaging is made of environmentally friendly materials, which may be
disposed of through your local recycling facilities.
Observe the marking of the packaging materials for waste separation, which are
marked with abbreviations (a) and numbers (b) with following meaning: 1–7:
plastics/20–22: paper and fibreboard/80–98: composite materials.
Contact your local refuse disposal authority for more details of how to
dispose of your wornout product.
To help protect the environment, please dispose of the product properly when ithas reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.
Warranty
The product has been manufactured to strict quality guidelines and
meticulously examined before delivery.
In the event of material or manufacturing defects you have legal rights
against the retailer of this product.
Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The
warranty period begins on the date of purchase. Keep the original sales
receipt in a safe location as this document is required as proof of purchase.
Any damage or defects already present at the time of purchase must be reported
without delay after unpacking the product.
Should the product show any fault in materials or manufacture within 3 years
from the date of purchase,we will repair or replace it – at our choice – free
of charge to you. The warranty period is not extended as a result of a claim
being granted. This also applies to replaced and repaired parts.
This warranty becomes void if the product has been damaged, or used or
maintained improperly.
The warranty covers material or manufacturing defects. This warranty does not
cover product parts subject to normal wear and tear, thus considered
consumables (e.g. batteries, rechargeable batteries,tubes, cartridges), nor
damage to fragile parts, e.g. switches or glass parts.
Warranty claim procedure
To ensure quick processing of your claim, observe the following instructions:
Make sure to have the original sales receipt and the item number (IAN
444780_2307) available as proof of purchase.
You can find the item number on the rating plate, an engraving on the product,
on the front page of the instruction manual (bottom left), or as a sticker on
the rear or bottom of the product.
If functional or other defects occur, contact the service department listed
below either by telephone or by e-mail.
Once the product has been recorded as defective you can return it free of charge to the service address that will be provided to you. Ensure to enclose the proof of purchase (sales receipt) and a short, written description outlining the details of the defect and when it occurred.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>