FORTIN 2019-2023 Evo All Chevrolet Blazer Push To Start Vehicle Installation Guide

FORTIN 2019-2023 Evo All Chevrolet Blazer Push To Start Vehicle

Product Information

Specifications

• Product Name: Stand Alone Remote Starter
• Compatible Vehicles: Chevrolet Blazer, Traverse
• Push-To-Start Model Years: 2019-2023 for Blazer, 2018-2023 forTraverse
• Firmware Version: 70.[41]
• Made in: Canada
• Website: www.fortinbypass.com

Product Usage Instructions

• Installation
  It is recommended to have the Stand Alone Remote Starter installed by a qualified technician. Incorrect connections can lead to permanent damage to the vehicle.

• Functionality Setup
  Ensure that all necessary parts are included before installation. For vehicles without a functional hood pin, program the bypass option according to the provided instructions. The hood pin switch must be installed for proper functionality.

• Remote Start
  To remotely start the vehicle, ensure all doors are closed, and follow the instructions for using the OEM remote or smartphone. The safety switch under the dashboard must be turned on before any maintenance work on the vehicle.

• Diagnostics
  Interpret the LED flashes on the remote starter diagnostics module to identify issues: x3 flash indicates no tach signal, x4 flash indicates ignition, and x5 flash indicates the hood is open.

FAQ

• Q: How do I know if my vehicle is compatible with the Stand Alone Remote Starter?
  A: The Stand Alone Remote Starter is compatible with Chevrolet Blazer and Traverse models within specific model years. Refer to the user manual for detailed compatibility information.

• Q: Can I install the Stand Alone Remote Starter myself?
  A: It is recommended to have the Stand Alone Remote Starter installed by a qualified technician to avoid any potential damage to the vehicle due to incorrect connections.

• Q: What should I do if I encounter issues with remote starting my vehicle?
  A: If you face issues with remote starting, refer to the diagnostics module’s LED flashes for troubleshooting information. Ensure all doors are closed and follow the correct remote start procedure.

REV.: .: 2024
Guide # 83991

STAND ALONE INSTALLATION INSTALLATION STAND ALONE
ADDENDUM – SUGGESTED WIRING CONFIGURATION ADDENDA

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES. COMPATIBLE AVEC VÉHICULE À TRANSMISSION AUTOMATIQUE SEULEMENT.

Parts required (Not included)

• 1X 1k Ohm Resistor
• Pièce(s) requise(s) (Non incluse(s))
• 1X Résistance 1k Ohm

MANDATORY INSTALL
INSTALLATION OBLIGATOIRE

•   HOOD PIN

• HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED
  IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

• Notice: the installation of safety

• THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

• This guide may change without notice. See www.fortin.ca for latest version.

PARTS REQUIRED (NOT INCLUDED)

Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.

STAND ALONE CONFIGURATION

REMOTE STARTER FUNCTIONALITY

REMOTE STARTER WARNING CARD

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.

WARNING

REMOTE STARTER
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

DESCRIPTION

WIRING CONNECTION

KEY BYPASS PROGRAMMING PROCEDURE 1/3

• Press hold Connect and the programming button: the 4-PIN Data-link harness (Black connector). The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate
• Release the programming button when the LED is YELLOW.
  • If the LED is not solid YELLOW the 4-Pin connector (Data-Link) and go back to step 1.
• Insert the required remaining connectors.
• Press and release the programming button five (5x) times
•  The Yellow button five (5x) times
• WAIT for the YELLOW LED to turn ON solide
• Open the driver door
• Press the foot-brake pedal.
• Press the Push-to-Start button until the engine start.
• Release the foot-brake pedal
  • The RED LED will turn ON.
  • The YELLOW LED will turn OFF.
• Press the Push-to-Start button until the engine turn OFF.
• Close and open the driver door
• Press the foot-brake pedal
• Press the Push-to-Start button until the engine start.
• Release the foot-brake pedal.
• The BLUE LED will turn ON.
• The BLUE LED will turn OFF.
• The RED LED will turn OFF.
• The YELLOW LED will flash rapidly
•  The BLUE LED will turn ON.
• The BLUE LED will flash rapidly

KEY BYPASS PROGRAMMING PROCEDURE 2/3

• Press the Push-to-Start button until the engine turn OFF
• The BLUE LED will flash slowly
• AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.
• REMOTE STARTER / ALARM VERIFICATION PROCEDURE

REMOTE STARTER FUNCTIONALITY

• All doors must be closed.
• Unlock the doors with either:
  • The OEM remote
  • The remote-starter remote
  • Or the proximity remote
• Enter the vehicle with the Intelligent Key.
• The vehicle can now be put in to gear and driven.

If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.

Notice: Updated Firmware and Installation Guides Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and  download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

References

• opened.si - This website is for sale! - opened Resources and Information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>