RC FACTORY 2217 High Performance Jabberwocky Instruction Manual
- August 14, 2024
- RC Factory
Table of Contents
RC FACTORY 2217 High Performance Jabberwocky
Product Specifications :
- Length: 1100 mm
- Width: 1040 mm
- Weight: 600-650g
- Battery: Li-pol 3s
- Motor: 2217
- Propeller: 10 – 4.6
- Version: V1.0
Product Usage Instructions
Assembly:
- Secure components using M3x22 screws.
- Refer to section A and B for proper component placement.
- Use a 5.5mm wrench for tightening.
- Cut parts as indicated on both sides.
- For carbon parts, use Thin CA adhesive.
- Drill holes with a 1.5mm drill bit when necessary.
Gluing Instructions:
- Utilize Medium CA Activator for fast bonding.
- Apply Medium CA adhesive to parts needing secure attachment.
- For specific gluing sequences, refer to the manual steps.
Servo and Electronics Setup:
- Ensure servo center alignment for proper function.
- Connect ESC and battery according to recommended specifications.
Frequently Asked Questions (FAQ):
-
Q: What type of glue should I use for assembly?
A: It is recommended to use Medium CA adhesive along with Activator for best results. -
Q: How should I secure carbon parts?
A: Use Thin CA adhesive for bonding carbon parts together as specified in the manual. -
Q: What is the recommended battery type for this product?
A: The recommended battery type is Li-pol 3s for optimal performance.
DIMENSIONS
TOOLS
PARTS
ASSEMBLY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>