RC Factory B24-25 Piper SC Instruction Manual
- July 24, 2024
- RC Factory
Table of Contents
RC Factory B24-25 Piper SC
Specifications
- Dimensions: 1150 mm x 850 mm
- Weight: 380g
- Battery Type: Li-pol 2-3s
- Motor: 2206
- Recommended Propeller Size: 8 – 9 inches
Product Usage Instructions
Assembly Steps
- Attach M3x22 screws.
- Install component B with M3 screws.
- Secure component A with M3 screws.
- Follow steps 5 to 29 for various components using Medium and Thin CA glue as instructed.
- Make necessary cuts as indicated in steps 18, 20, 24, and 42.
- Use the Activator as needed.
Gluing Instructions
Apply Medium CA glue for steps requiring a strong bond. Use Thin CA glue for delicate parts or where a less viscous adhesive is needed.
Additional Tips
- Make precise markings with a pen as instructed.
- Ensure servo center alignment for proper functionality.
- Take caution when using adhesives and Activator.
Required Tools
Package Content
Dimensions
Installation
Tunning kits on www.rc-factory.eu
You can upgrade your Piper with flaps and floats!
We wish you many happy flying hours with your Piper SC!
RC Factory team
FAQ
Q: Can I upgrade my Piper SC with additional features?
A: Yes, you can upgrade your Piper with flaps and floats. Tunning kits are available on www.rc-factory.eu.
Q: What is the recommended CG (Center of Gravity) for the Piper SC?
A: The recommended CG is between 50-60mm.
Q: Any specific recommendations for flying the Piper SC?
A: Ensure the battery type and motor specifications are compatible for optimal performance. Follow assembly instructions carefully for safe and enjoyable flying experience.