RC FACTORY FLASH CL 39 Inch EPP Flash Control Line Plane Instruction Manual
- August 20, 2024
- RC Factory
Table of Contents
RC FACTORY FLASH CL 39 Inch EPP Flash Control Line Plane
Specifications
- Model: FLASH CL
- Wingspan: 870 mm
- Length: 865 mm
- Weight: 250g
- Battery: Li-pol 3s 850mAh
- Motor: 2212 1000kv
- Propeller: 9×4.6
Product Usage Instructions
Assembly
- Follow the recommended measurements for cutting the required parts.
- Assemble the components using medium CA adhesive.
- Ensure proper balance by adjusting the CG between 25-35mm.
Flight Preparation
- Charge the Li-pol battery fully before the flight.
- Check all control surfaces for proper movement and secure connections.
- Perform a pre-flight check to ensure all components are functioning correctly.
Flight
- Launch the FLASH CL by hand or using a suitable launching device.
- Maintain control line movements to maneuver the aircraft.
- Monitor battery levels and land the aircraft safely before departure.
- 40mm … 2x (2pcs)
- 80mm … 1x (1pcs)
- 100mm … 2x (2pcs)
- 125mm … 1x (1pcs)
- 485mm
Dimension
USING INSTRUCTION
We wish you many happy flying hours with your Flash CL
RC Factory team
FAQ
- Q: What should I do if the motor is not starting?
- A: Check the battery connection and ensure the motor wires are properly connected. If the issue persists, consult with technical support.
- Q: How can I improve the aerobatic performance of the FLASH CL?
- A: Experiment with different propeller sizes and adjust the CG within the recommended range to enhance maneuverability.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>