cecotec CCTC-03305 Cecofry Rain Acc Kit User Manual
- June 1, 2024
- cecotec
Table of Contents
- SAFETY INSTRUCTIONS
- PARTS AND COMPONENTS
- BEFORE USE
- OPERATION
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- TECHNICAL SPECIFICATIONS
- DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
- TECHNICAL SUPPORT AND WARRANTY
- COPYRIGHT
- Customer Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
cecotec CCTC-03305 Cecofry Rain Acc Kit
SAFETY INSTRUCTIONS
Before using the appliance, read the following instructions carefully. Keep this instruction manual for future reference or new users.
-
All safety instructions must be closely followed when using the appliance.
-
When using electrical and electronic appliances, basic precautions must always be followed to reduce the risk of fire, electrical shock, and injury.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.
-
Keep this appliance and its power cable out of reach of children under the age of 8.
This symbol means ‘CAUTION: hot surface’. The temperature of the accessible surfaces may be high when the appliance is in operation. -
This appliance is not intended to be operated by means of an external timer or separate remote-control system.
-
Do not immerse the cable, plug, or any other non-removable part of the appliance in water or any other liquid. Do not expose the electrical connections to water.
-
This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
-
Position the appliance in such a way to avoid spillage of hot liquids. Be especially careful with the handle.
-
Make sure the voltage of your mains supply matches the voltage requirements specified in the rating label of the appliance.
-
We recommend that the room where you intend to use the appliance is equipped with a working extractor fan or is well ventilated.
-
Incorrect or improper use can damage the appliance and be dangerous for the user. Use the device only for the purposes described in this manual.
-
Unplug the appliance from the mains supply before moving it, carrying out any cleaning or maintenance task, or when not in use.
-
Do not use outdoors.
-
Check the power cable regularly for visible damage. If the cable is damaged, it must be repaired by the official Cecotec
Technical Support Service to avoid any type of danger. -
Do not twist, bend, pull, or damage the power cable. Protect it from sharp edges and heat sources. Do not allow the cable to touch hot surfaces. Do not let the cable hang over the edge of the working surface or worktop.
-
Do not use extension cords, unless advised by a qualified electrician. Using the wrong type of extension cable could cause damage to the appliance or injuries to the user.
-
Do not use the appliance if its cable, plug, or housing are damaged, nor after it malfunctions or has been dropped or damaged in any way.
-
The appliance should not be used in potentially dangerous locations, such as flammable, explosive, chemical-laden, or wet atmospheres.
-
Place the appliance on an even, heat-resistant surface. Be careful when placing the basket out of the air fryer. Place the handle inwards to prevent spillage of what’s inside. Do not place the appliance near heat sources, places with high humidity levels, or combustible materials.
-
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust openings, as it could cause electrical shock or fire.
-
Do not fill the basket with oil to avoid causing a fire hazard.
-
Do not touch the interior of the appliance while in operation.
-
Always place the ingredients to be cooked inside the basket to prevent them from touching the heating elements.
-
Make sure your hands are dry before handling the plug or switching on the appliance.
-
Unplug the appliance from the outlet when not in use or when it is being cleaned. Allow it to cool down completely before attaching or removing parts and before cleaning the appliance.
-
Do not leave the appliance unsupervised while plugged to the mains.
-
Cleaning and maintenance must be carried out according to this instruction manual to make sure the appliance operates properly.
-
Do not place the appliance against the wall. Leave a safety distance of 10 cm on the back of the appliance and 10 cm on each side. Do not place any object on top of the appliance when in use.
-
Hot steam is released through the air outlet openings of the appliance during operation. Keep your hands and face at a safety distance from the steam and from the air outlet openings. Hot air may come out when removing the basket from inside the appliance.
-
Immediately unplug the appliance if you notice black smoke coming out of it. Wait until the smoke disappears to remove the basket from the appliance.
-
We recommend the use of gloves when touching the basket and rack.
-
Do not try to repair the appliance by yourself.
-
Supervise children to prevent them from playing with the appliance.
PARTS AND COMPONENTS
Fig. 1
- Control panel
- Main body
- Display
- Basket
- Handle
- Oil tank
- Air outlet
- Power cable
- Silicone brush
- Silicone spatula
- Silicone mat
- Silicone mould
Control panel. Fig. 2
- Menus
- Temperature touch icon
- Timer touch icon
- Timer knob
- Oil level touch icon
- Power/Start/Pause button
- Increase touch icon
- Display
- Decrease touch icon
Note:
The graphics in this manual are schematic representations and may not exactly match the appliance.
BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.
- Clean the basket, basket grille, heating element protective grille and oil tank thoroughly with hot water, detergent and a non-abrasive sponge.
- Clean the inside and outside of the appliance with a soft damp cloth. Do not fill the appliance with oil or other liquids.
- Place the metal grille into the appliance until it clicks into place as shown in figure 8.
Protective metal grille
Installation. Fig. 8
The protective metal grille is located at the top of the inside of the air fryer. This grille protects the heating element. Due to the use of oil spray this part is removable for cleaning.
The protective metal grille features
- A flexible flange that can be pressed to facilitate the exit or entry of the grille.
- A fixed flange to support the grille before fitting it against the flexible flange.
- Two lateral supports to guide the grille.
To attach or remove the grille
To attach the grille to its bracket you first need to insert the grille into the fixed flange and be guided by the two side brackets, once this step is done, you have to press the grille against the flexible flange to fix the grille completely.
Cleaning
- The grille should be cleaned after each use to prevent oil build-up on the grille.
- To clean the grille, use hot water, a non-abrasive detergent and a non-abrasive sponge.
- Make sure that the fryer is completely cool before cleaning.
OPERATION
Preparation
-
Always place the appliance on an horizontal, flat and stable surface. Do not place the appliance on hot surfaces such as induction hobs.
-
Do not place the appliance on a dry, stable, and heat-resistant surface.
-
Place the basket rack in the basket itself as shown in figure 3.
-
Make sure that the oil tank is fitted to the appliance and that it is full. If the oil tank is not inserted correctly or is empty, the appliance will emit an acoustic alert and the message
“Add Oil” will appear on the control panel display every time the device is to spray oil.
The appliance will not spray oil on the food if there is not enough oil in the tank or if the tank is empty and will continue the process until the end of the programme. To add oil, remove the oil tank as shown in the figure. 7, open the tank cover and fill the tank to the MAX mark.
-
do not use the basket or grille with oil or any other liquid.
-
Do not place any objects on top of the appliance, as this will interrupt the airflow and affect the cooking result.
-
You will hear a loud noise caused by the internal pump during the first use: this is normal and does not indicate a malfunction.
Air fryer
-
Connect the power cable to an earthed plug socket.
-
Remove the basket from the air fryer. Fig. 6
-
Make sure that the protective grille is securely in place Fig. 8
-
Put the basket back in the air fryer. Carefully align the guides of the basket and the fryer body and insert it. Fig. 4
Note : you should use the fryer with the grille placed inside the basket to promote air flow and obtain better results.
-
Determine the time, temperature and oil level for the preparation according to each food, or select a default programme (see the “Settings” section of the “Operation” section).
-
Before starting each programme, the device will warm up to improve the preparation results. The device will show a rectangle loading. This warm-up can take a few minutes.
-
Place the food in the basket (Fig. 5).
-
Some ingredients must be stirred halfway through the cooking process. To stir, pull the basket out of the appliance using the handle and remove the food using a wooden or plastic kitchen utensil. Then slide the basket back into the air fryer.
-
When you hear the timer signal, the set preparation time has elapsed. Remove the basket from the appliance and place it on a heat-resistant surface. Be careful when removing the basket as it can give off heat and steam.
Note : You can also stop the appliance manually. to do so, touch the power/start/pause touch icon. if you want to cancel the programme, press and hold the power button. -
Make sure the food is cooked. If the food isn’t cooked enough, slide the basket drawer back into the air fryer and add a few more minutes to the timer. If this happens when the programme has finished, the programme will resume preheating, but this will take no more than a few seconds after the warning, simply remove and reinsert the basket to start the cooking process.
Warning:
- Do not touch the basket during operation or immediately after use to avoid burns. Hold the basket only by the handle.
- Never use metal utensils as these can damage the surface.
- do not turn the basket upside down so that the excess oil accumulated in the bottom of the basket does not spill over the ingredients. The ingredients, basket, and the fryer itself will be hot. Depending on the type of ingredients cooked, steam may escape from the basket drawer.
Operation
-
The power/start/pause touch icon will remain on after the fryer has been started.
-
If you press the power/start/pause touch icon, you will hear an acoustic signal and the display will show “—”. The menu icons will light up.
-
Select the desired menu and make sure that the oil tank is full and properly installed.
-
If you wish to delay the start of cooking, select a menu and modify the desired values by pressing the timer icon and selecting the time you wish to delay cooking, then press the power/start/pause icon to start the process. The time can be set from 0.5 to 24 hours using the increase and decrease icons.
-
You can adjust the cooking time from 1 to 60 minutes in one-minute intervals by clicking on the time icon and changing the time using the increase and decrease icons. The time can be adjusted during cooking.
-
You can adjust the temperature from 70 to 200°C in 5°C intervals by clicking on the temperature icon and changing the temperature using the increase and decrease icons. Temperature can be adjusted during cooking.
-
You can adjust the oil spray level from 0 to 7 in increments of 1 by clicking on the oil level icon and changing the level using the increase and decrease icons. The oil level can be adjusted during cooking.
-
Press the power/start/pause touch icon to start the device. The heating element switches on and off during a complete cycle several times, this is completely normal in order to keep the temperature of the basket constant.
-
The control panel display will show a rectangle loading to indicate that the fryer is preheating. This warm-up may take a few minutes if the device is completely cool. When the fryer has finished preheating, the display will show “Add Food” and a warning signal will sound.
-
After hearing the warning signal and seeing the corresponding message on the display, remove the basket and place the ingredients in the basket (the display will show “PAUSE”).
-
After adding the ingredients, place the basket back into the fryer and the fryer will automatically start the cooking process.
-
When cooking is complete, the display will show “End” for 15 seconds and three beeps will sound.
-
Press and hold the power/start/pause touch icon to access the menu selection interface.
Once inside, press and hold the power touch icon again to turn the fryer off. -
The fryer will enter “Stand-By” mode after 5 minutes without selecting any option.
Menus
The following table shows the temperatures and times of the menus:
| Min-max Amount (g)| Temp (ºC)| Time (min.)| Oil level| Shake
---|---|---|---|---|---
Chips| 200 – 600| 200| 20| 6| YES
Steak| Surface| 180| 10| 4| –
Fish| Surface| 180| 8| 6| –
Pizza| Surface| 180| 8| 0| NO
Chicken wings / drumsticks| Surface| 200| 25| 4| NO
Muffins / CupCake| Surface| 170| 10| 0| NO
DIY (Manual)| Surface| 200| 20| 4| –
Defrost / Keep warm*| Surface| 70/80| 25/10| 0| –
Cleaning indicator light| Surface*| 70| 20| 0| –
Vegetables| 100-400| 170| 10| 4| YES
Note:
*For foods with the recommended amount of surface area, do not fill more than the surface of the basket for best results, if you fill more than the recommended amount, the food underneath will not cook properly.
** Within the Defrost / Keep warm programme you can select one option or the
other by clicking again on the default programme icon.
As ingredients differ in origin, size, shape, and brand, we cannot guarantee
the best setting for the ingredients that you are using. If necessary, change
the times and/or temperature values to adjust the cooking to the type of
ingredient.
Briefly removing the basket during the frying process does not affect the
cooking.
Tips
- Smaller ingredients require a shorter preparation time than larger ones.
- A larger quantity of ingredients only requires a slightly longer preparation time, and a smaller quantity of ingredients only requires a slightly shorter preparation time.
- Shaking smaller food midway through the cooking process optimises the end result and prevents uneven cooking.
- Do not cook excessively fatty foods in the air fryer (e.g. sausages).
- Oven-ready snacks can also be cooked in the air fryer.
- The optimal amount for preparing crispy fries is 500 grams.
- Pre-made dough requires a shorter preparation time. Pre-made dough requires a shorter preparation time than home-made dough.
- Place a baking pan or baking dish in the air-fryer’s basket if you want to bake a cake or quiche or if you want to fry fragile or stuffed foods.
- You can also use the device to reheat food. To reheat food, set the temperature to 150°C for 10 minutes.
Oil level
This device has a new technology capable of spraying oil into the basket
during operation.
For this purpose, the device switches off the heating element and the fan and
sprays the oil after 5 seconds, then resumes normal operation after a few
seconds. The tank has a total capacity of 30 mL of oil.
The operation of the programme is set by ranges, each spraying level has two ranges:
- Range 1 : starts from minute 20 to minute 12, counting down. During this range, spraying is performed every 4 minutes or every 2 minutes, depending on the selected oil level.
- Range 2 : starts from minute 12 until the end of the process. During this range, spraying is performed every 4 minutes or every minute, depending on the selected oil level.
- In each range the duration of spraying is different.
The following table shows the spraying ranges, the number of total sprays and the amount of oil used in each programme.
Oil level| Time (min)| Range 1 (20-12 min)| Range 2 (11-0 min)| Number of
sprays| Total amount of oil used (ml)
---|---|---|---|---|---
0| 20| –| –| –| –
1| 20| Spraying every 4 min| Spraying every 2 min| 8| 3
2| 20| Spraying every 4 min| Spraying every 2 min| 8| 6
3| 20| Spraying every 4 min| Spraying every 2 min| 8| 9
4| 20| Spraying every 2 min| Spraying every minute| 15| 12
5| 20| Spraying every 2 min| Spraying every minute| 15| 18
6| 20| Spraying every 2 min| Spraying every minute| 15| 23
7| 20| Spraying every 2 min| Spraying every minute| 15| 27
Note:
- The data shown in the table are measured for a 20-minute cycle.
- The data obtained have been calculated with Virgin Olive Oil and at an ambient temperature of 25ºC. If you get different results it may be due to the use of different types of oils and their different densities.
- Do not use oils and fats that are solid at room temperature. Note that very low temperatures can solidify the oil. Clean the tank and internal oil tubes after each use.
- If you change the cooking time to more than 20 minutes, the device will spray every 2 minutes for all levels with the amount of oil per spray corresponding to each level.
- If you decrease the program time to 15 minutes, the air fryer will perform the first full range and 3 more minutes of the next full range.
Programme DIY: MANUAL.
The DIY or manual program is a special program that allows you to spray oil whenever you want. To do this, select this program and oil level 0. Oil levels can be used with this program and you can spray manually.
CLEANING AND MAINTENANCE
Cleaning
- Clean the appliance after every use.
- The protective grille, the basket and the basket grille have a non-stick coating. Do not use metal utensils or abrasive products to clean them, as this may damage their nonstick surface.
-
Unplug the appliance and allow it to cool down before cleaning.
Tip :
Remove the basket to let the appliance cool down more quickly. -
Clean the inside and outside of the appliance with a damp cloth.
Tips:
- We recommend the use of liquid degreaser for food use to remove any remaining dirt.
- If the basket and grille are very dirty, soak them in hot water and cleaning solution for 10 minutes.
- Clean the inside of the appliance with hot water and a non-abrasive sponge, taking care not to damage the resistance.
- Clean the spray nozzle with hot water and a non-abrasive sponge.
- Remove the protection grille and clean the grease with hot water, detergent and a nonabrasive sponge.
- To clean the tank and internal oil tubes, you can enter the DIY mode and at oil level 0 you can press the DIY button until the tank and internal tubes are empty, the device will indicate that there is no more oil left by means of the “Add Oil” notice.
Storage
- The power cable can be stored inside the appliance.
- Make sure all components are clean and dry.
- Be sure to clean the sprayer and the removable protective grille.
TROUBLESHOOTING
Problem | Possible causes | Possible solutions |
---|---|---|
E1 | Temperature sensor not working | Contact the official Cecotec Technical |
Support Service.
E2| Temperature sensor not working| Contact the official Cecotec Technical
Support Service.
The air fryer does not work| The appliance is not plugged in.| Connect the
power cable to an earthed plug socket.
Cooked foods are raw.| The food is too big.| Put smaller batches of food in
the basket. Smaller batches are cooked more evenly.
The temperature used is too low.| Select a higher temperature (see the
“Operation” section).
The preparation time is too short.| Select a longer time (see the “Operation”
section).
The ingredients are cooked unevenly in the air fryer.| Some types of food need
to be shaken during the cooking process.| Ingredients that lie on top of or
across each other (e.g. chips) need to be shaken halfway through the
preparation time. See the ‘Operation’ section.
The ingredients are not crunchy.| Increase temperature| Increase the cooking
temperature to generate greater dehydration in the superficial layer of the
same and obtain more crunch.
Increase the oil level| Turn up the oil level for crispier results.
The basket does not slide into the appliance properly.| There are too many
ingredients in the basket.| Do not fill the basket beyond the max. indication.
The basket is not placed correctly.| Push the basket following the guides down
into the air fryer until you hear a click.
White smoke comes out of the appliance.| You are preparing greasy
ingredients.| When you use fatty ingredients, a large amount of oil seeps into
the basket. The oil produces white smoke and the basket may become hotter than
normal. This does not affect the appliance or the result.
The basket contains grease from previous uses| The white smoke is due to the
fat heating up in the basket. Make sure you clean the device properly after
each use.
Fresh chips are fried unevenly.| You did not use the right potato type.| Use
fresh potatoes of the baking and frying varieties and make sure they hold firm
during frying.
You did not rinse the potato sticks properly before you fried them.| Rinse the
potato sticks properly to remove the starch.
Fresh chips are not crispy.| The right kind of potato is not being used.| Be
sure to dry the potatoes before starting the process.
Cut the potato sticks on smaller pieces for crispier results.
Turn up the oil level for crispier results.
TECHNICAL SPECIFICATIONS
Product reference : 03305
Product : Cecofry Rain Pack Air fryer
Power : 1550 W
Voltage : 220 – 240 V
Frequency : 50/60 Hz
Oil tank capacity 30 ml
The power consumption in “standby” mode is 0.4 W using the guidelines of the
EN 50564:2011 standard and the European regulations 1275/2008/EC and
801/2013/EC. To do this, the device is connected to the electrical network
without performing any function. The switch/controller of the appliance was
set to the Standby position.
Technical specifications may change without prior notice to improve product
quality.
Made in China | Designed in Spain
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or battery must be disposed of separately from household waste.
When this product reaches the end of its shelf life, you should dispose of the
cells/batteries/accumulators and take them to a collection point designated by
the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity
that exists at the time of delivery of the product under the terms,
conditions, and deadlines established by the applicable regulations.
It is recommended that repairs are carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt,
do not hesitate to contact the official Cecotec Technical Support Service at
+34 963 210 728.
COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.
Customer Support
Cecotec Innovaciones S.L.
Av. Reyes Católicos, 60
46910, Alfafar (Valencia), Spain
RP01230629
www.cecotec.es
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>