RC Factory FS2A 4CH AFHDS 2A Mini Receiver User Manual
- June 9, 2024
- RC Factory
Table of Contents
RC Factory FS2A 4CH AFHDS 2A Mini Receiver User Manual
Introduction
Binding procedure:
Press and hold the key on the receiver and connect the power to the receiver.
The blue light on the receiver starts flashing, inducing binding mode.
Set the transmier into bind mode (make sure that you selected the AFHDS 2A
protocol).
Aer geng into bind mode, the receiver light changes from flashing to slow
flashing.
Get the transmier out of bind mode.
The receiver blue light becomes steady, indicang that the signal receive is
successful.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>