Dongguan Boxinda Electronic Technology B-16 3-In-1 Wireless Charger User Guide

Dongguan Boxinda Electronic Technology B-16 3-In-1 Wireless Charger

Features of Product

1. 3 in 1 Wireless Charger:
   • wireless charger for iPhone 12 / mini / pro / promax / iphone 13 / mini /pro / promax (5W/7.5W/10W/15W Wireless charger for Qi enabled phones)
   • Wireless charger for Earphone.
   • Wireless charger for iWatch.
2. Compact Design: Simple and strong, easy to use and carry.
3. Suitable for Use: Travel, home, hotel, office, restaurant, bar, etc.

Specifications

• Model: B-16
• Input Voltage/Current: DC 9V/2A, 12V/2A
• Wireless Output for Phone: 5W-7.5W-10W-15W Max.
• Wireless Output for Earphone: 3W Max.
• Wireless Output for iWatch: 2W Max.
• Material: ABS+PC Fireproof Material
• USB Cable: 120cm Type-C to USB-A
• Product Size: L123.5W75H141.5mm
• Net Weight: 2459
• Color: Black / White

Product Diagram

1. Wireless Charger for Phone (Charger for iPhone 12/mini/pro/promax/iphone 13/mini /pro/promax)
2. Wireless Charger for earphone
3. Wireless Charger for iWatch
4. Power Indicator
5. Cooling Hole
6. Type-C Input

How to Use

1. Connect this charger to PD/Quick Charge 3.0 by USB cable.
   Attention: The input must be 9V/2A or 12/2A Charger.
   
   

2. Charge your device.
   

3. Plug in the charging cable

4. Connect the Quick Charge 3.0

5. Charge your iPhone 12/mini/pro/promax/iphone 13/mini pro/promax

6. Charge your earphone

7. Charge your iWatch

Indicator Status

1. Power on: 3 lights (White, Blue, Green) are on at the same time, then the lights go out after 3 seconds and enter standby mode.
2. Standby: 3 lights (White, Blue, Green) are off.
3. Charging your phone: The green light is on, and goes out after 20 seconds.
4. Charging your Apple Watch: The white light is on, and goes out after 20 seconds.
5. Charging your earphone: The blue light is on, and goes out after 20 seconds.
6. Full Charge: The indicators do not prompt when the devices are full charged.

Safety Tips

Please adhere to these basic precautions while using this product, as follows:

1. Read all the instructions before use.
2. This product can be normal used between the temperatures of 32°F (0°C) to 95°F (35°C).
3. Do not expose the device to fire or excessive temperature. Exposure to fire or excessive temperatures may cause an explosion.
4. Do not expose the device to moisture.
5. Keep away from water or other liquids which may lead to short circuit while using the product.
6. Close supervision is necessary when the product is used near children.
7. Do not use this wireless charger if damaged or modified.
8. Do not disassemble the device. Incorrect reassembly may result in risk of fire or injury.
9. Ensure that qualified service professionals use only identical replacement parts to ensure product safety.
10. Accessories placed on the back of your smart phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove accessories from the phone before attempting wireless charging.
11. Remove your phone / watch / earphone when it is fully charged. Please unplug the power adapter when your devices are fully charged.

FCC Information

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>