BRAWA H0 DIL 212 DB IV AC Ex World Of Trains Model Railway Shop User Manual

BRAWA H0 DIL 212 DB IV AC Ex World Of Trains Model Railway Shop

Specifications

• Product Name: Diesel Loco V100 West
• Models: 211, 212, 213, V 100.10, V100.20
• Scale: H0
• Intended Users: Adult collectors

Product Usage Instructions

Before Starting Up

Before starting up the product, perform the following tasks:

• Refer to general assembly and safety information.
• Use only a toy transformer compliant with VDE 0570-2-7/DIN EN 61558-2-7 as the voltage source.

Dismantling Instructions (Analog Version)
To dismantle the NEM shaft in the analog version:

1. Follow work-step dismantling instructions.
2. Refer to position number of spare part (Pos.) 29.

Converting to Digital Operation

For DC version

1. Consult the installation instructions from the decoder manufacturer for the correct installation of the digital decoder.
2. The factory setting for the decoder is address 03.

For AC version:

1. Use the premium digital decoder (01) for AC locomotive models.
2. The decoder identifies the operation type automatically.
3. If reprogramming is needed, refer to the enclosed installation and operation instructions.
4. The factory setting for the decoder is address 03.

Exchanging Components

1. Exchanging digital decoder/speaker: Follow work step dismantling instructions.
2. Dismantling circuit board: Follow work step dismantling instructions.
3. Exchanging motor/cardan shaft: Follow work step dismantling instructions.
4. Dismantling bogie/NEM shaft: Follow work step dismantling instructions.
5. Dismantling bogie: Follow work step dismantling instructions.

General assembly and safety information

• These operating instructions describe all work steps necessary for maintenance and repair. Please read these operating instructions carefully before you start with your work.
• In the case of incorrect handling of electrical components, they may be destroyed. Please ask your specialist dealer to help with the necessary work (e.g. changing circuit boards).
• In the case of maintenance work, the disassembly is described below, to re-assemble the tractor reverse the work steps.
• The maintenance work described below is virtually identical for direct current and alternating current models. If there are any differences these will be pointed out specifically.
• All cables and connection wires installed in this product may not be inserted in a main socket. Danger!

Scale and true to original small-sized model for adult collectors.
Electrical equipment may not reach domestic waste. According to the current terms of the country reference the electrical equipment must be professionally disposed of.

Used Symbols

• Please refer to the symbols used in this operating instructions:
• Work step dismantling
• Position no. of spare part (Pos.)
• Lubricating

Fitting additional parts

There is an accessory bag added to the model but maybe not all parts will be needed. The additional parts are intended for the showcase. After mounting the additional parts, there can be limitations in driving mode

• 1 = 1x Multiple traction line long
• 2 = 4x Brake hose right
• 3 = 2x Heating pipe
• 4 = 4x Brake hose left
• 5 = 1x Connector multiple traction long
• 6 = 2x Heating connection
• 7 = 1x Multiple traction line short
• 8 – 1x Connector multiple traction short

Depending on the model, different numbers of parts are in the accessory bag

Converting to digital operation DC version

See item 4.
Please consult the installation instructions issued by the decoder manufacturer for the correct installation of the digital decoder and its insert direction.

AC version

The premium digital decoder (01) is standard for the alternating current (AC) locomotive models. The decoder independently identifies the operation type (analog/digital).
Please refer to the enclosed installation and operation instructions “Premium Digital
Decoder” if the decoder needs to be reprogrammed

The decoder is set to address 03 in the factory.

Dismantling housing

Exchanging the digital decoder/speaker
Dismantling the circuit board

Exchanging the motor/cardan shaft

Dismantling the bogie/NEM shaft

Dismantling the bogie

Worm gear/Gear set/
Wheelset/Traction tire

Spare Parts List

Spare Parts List

Function keys for digital models

Sounddecoder SD22-4 (DCC/SX1/SX2/Motorola/DC/AC) / DCC sound decoder SD22-4 (DCC/SX1/SX2/Motorola/DC/AC)

BRAWA-No.: 0014765.11; Version EXTRA with processor and energy storage

CV Attribution

Differentiation driving and standstill:

• Function is on only when driving: Wert+64
• Function is always off: Wert+192

Additional information for country code Germany:

Automatic coupling
The coupling is only controlled when the shunting mode is selected (F4). The F5 key serves the front coupling (long front end), F6 the rear coupling (short front end). It can always be only one coupling operated. F5 is still active (i.e. lowered), this coupling must be reset before with F6 the rear coupling can be operated. The coupling is set to simple lifting and lowering the coupling hook. It is also possible to set an automatic sequence when coupling:

• CV143 = 0 (automatic process at F5 and F6 without F4)
• CV143 = 64 (hand coupling at F5 and F6 without F4)
• CV143 = 128 (automatic process)
• CV143 = 192 (manual coupling at F5 and F6 with F4, default setting)

Storage capacitors
The storage capacitors are only charged after the model is set in motion. They buffer in digital mode the sound, the engine, and the lights. In analog mode, the memory circuit has no effect. With the CV1004 the buffer time can be limited (for example if red signals are passed over).

PLUX22-Serial interface
The locomotive is equipped with a PluX22 serial interface according to NEM 658. The locomotive is set at digital mode to the DCC mode with address 3. When changing the locomotive decoder of the digital sound locomotive (Extraversion) please make sure that the decoder controls the SUSI interface, since all additional lighting functions are controlled. In analog mode, the standard light changes and the cab lighting is active.  If a decoder is used, the „Basic+“-versions (DC with analog plugs and AC with standard decoder) have an assignment of the functions F1 to F4.The  „Extra“-versions (all sound versions) have an assignment of the functions  F1 to F21 (depending on the model).

FAQ

Frequently Asked Questions

• Q: Can I use any transformer with the product?
  • A: No, only a toy transformer compliant with VDE 0570-2-7/DIN EN 61558-2-7 should be used as the voltage source.
• Q: What is the factory setting for the decoder address?
  • A: The factory setting for the decoder address is 03.

Brawa Artur Braun Modellspielwarenfabrik GmbH  & Co. KG

• Uferstraße 2430 · D73630 Remshalden
• Hotline +49 (0)7151 979 35 68
• Telefax +49 (0)7151 746 62
• http://www.brawa.de

References

• Startseite - BRAWA Modelleisenbahn, Modellbahn, Zubehör - Spur 0, O, H0, HO, TT, N, Z

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>