RC Factory 39″ EPP Flash CL Control Line Set User Manual
- August 28, 2024
- RC Factory
Table of Contents
39″ EPP Flash CL Control Line Set
Product Specifications
- Control Line Set
- Max. Tension: 90%
- Screws: M3x8 – 4x, M3x6 – 1x
- Activator: Thin CA Activator
Product Usage Instructions
-
Control Line Set
Ensure all components of the control line set are included and in good condition before use. -
Tension Adjustment
Adjust the tension of the control line set to a maximum of 90% for optimal performance. -
Screw Installation
Use the provided M3x8 screws to secure the necessary components.
Use 4 screws for proper installation. -
Activator Application
Apply the Thin CA Activator as needed for activating adhesives or ensuring proper bonding. -
Trim Adjustment
Set the trim level to 100% for precise control and maneuverability.
USING INDTRUCTION
Frequently Asked Questions
- Q: How many M3x6 screws are included in the set?
- A: There is one M3x6 screw provided for specific installation requirements.
- Q: What is the purpose of the Thin CA Activator?
- A: The Thin CA Activator is used to activate adhesives quickly and ensure strong bonding.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>