Alpine Corporation WIN794S Tabletop Fountain Owner’s Manual
- August 13, 2024
- Alpine CORPORATION
Table of Contents
Alpine Corporation WIN794S Tabletop Fountain
WHAT’S INCLUDED
- Fountain (3 LED lights pre-installed)
- Fountain Back Door
- Fountain Pump
- Transformer
The pump may be packaged separately in an outer box located in the outer Styrofoam packaging.
FEATURES
- Flowing water adds a soothing sound to any environment
- Made of lightweight, durable fiberglass
- LED lights in each tier of this fountain are long-lasting, and energy-efficient, and create a stunning nighttime display
SPECIFICATIONS
- Power Requirements …… Standard Household 120V
- Water Capacity ………………. 0.8 US Gallons / 3 Liters
- Tubing Diameter …………………………………… 0.5” I.D.
ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully. Please check to ensure all parts have been removed from the packaging. Some splashing may occur when the product is in use.
-
Place the fountain base on a smooth & level surface. Allow enough space to access the pump.
-
Remove the pump from its packaging and adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled.
-
From the back opening of the fountain connect the vinyl tubing from inside the fountain to the water pump, then place the pump back into the fountain.
-
Pull out the LED light cord plugs through the back opening & connect to the attachments on the pump. Twist the protective sheath clockwise to cover and secure the connection.
-
Gently pour water into the fountain basin, being careful not to overflow and cause splashing. Make sure the water completely submerges the pump and the water runs clear during operation.
NOTE: We recommend that you use distilled water to prevent scale build- up. The first time you operate the pump it can take up to 5 minutes for the air to be completely expelled and water begins to flow properly -
Attach the power cord from the pump to the transformer, then plug it into your local power supply. Make sure that there is no water around the plug & always keep the power source in a dry place.
-
You can now adjust the water pump to your flow preference. (see Quick Tip #1) Once set, install the back Door Cover by sliding it into the designatedopening.
-
Congratulations, your fountain is now complete. Don’t forget to add water regularly as water will evaporate over time.
REPLACEMENT PART ITEM#
- Submersible Stream Pump .………….P065*
- Replaceable Transformer……….…….PL022T*
- Replacement LED Light……………….RLS100*
ALSO AVAILABLE FROM ALPINE
-
Fountain Care Formula………………..PPL102
Foam and scale remover for indoor and outdoor fountains. -
Americana® UV Acrylic Sealer ………RRR106
Provides protective clear coating for all painted surfaces. -
Touch Up Paint Kit….…………….…….RTD102
Includes primer, thinner, 7 paint colors, applicator, and sealer.
TROUBLES HOOTING
If you have any questions and/or problems, please contact the retail store where you purchased this fountain.
If your pump fails to run
- Check the circuit breaker or try a different outlet to make sure the pump is receiving electrical power.
- Check the pump discharge and tubing for any kinks and/or obstructions
- Any buildup obstructing the water flow can be flushed with a garden hose
- Check the rotor by removing the front cover & plate to access the impeller area. Turn the rotor and make sure that the rotor is not jammed or broken
If your pump “spews”
- Check the water level to make sure the pump is completely submerged and there is enough water in the basin to operate your fountain. Not having enough water will cause your pump to spew
If your pump is making abnormally loud noises
- Disconnect the pump from the electrical power supply and remove the front cover & plate
- Carefully grip the impeller and gently pull the impeller/rotor assembly out of the pump housing
- Rinse the impeller/rotor assembly and clean the cavity with clean water. If breakage or damage is found, contact your local retailer for parts.
CAUTION
- Always unplug the pump from the electrical outlet before cleaning & handling
- Use with clean water only, do not place the fountain and/or parts in any other liquid.
- Periodically change the water & clean the pump to keep free from microorganisms
- Disconnect and store the unit in a dry place if not in use for an extended period of time
- Do not operate with water above 90°F or 30°C
- Do not lift, carry, or pull the pump by the power cord
- Do not exceed the maximum voltage & wattage on the transformer
- NEVER LET THE PUMP RUN DRY
LIMITED WARRANTY INFORMATION
Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided. Photos of defective merchandise will also be required to help distinguish the actual cause of the defect. Please read below for a detailed description of warranty coverage.
- Water Damage Alpine products are not manufactured to withstand extreme temperatures. Improper storage that allows water to freeze within a product may cause damage, is considered negligence, and will not be covered under this warranty. The use of “hard water,” and/or caustic cleaners, can affect the painted or other finishes. Failure to keep the unit clean, and use of such additives/cleaners, will also void the warranty. Please note: for fountains, it is normal for some splashing to occur, and protecting the immediate surfaces is not the responsibility of Alpine Corporation.
- Paint & Color (Retention and/or Loss) The use of water will cause natural erosion to the color. This area can be touched up using standard paint. The paint is designed to protect the entire finish against the breakdown of color. As with any product, all finishes with time will gradually fade and discolor. The warranty will only cover against severe or complete fading, within the first year from date of purchase, with the above exclusion.
- Procedure/Service Should a warranty/claim be needed, you should contact the retailer from whom you purchased the product. If that is not an option, you can contact Alpine Corporation at www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to show proof of purchase and provide photographs and any other information needed to validate your claim. This may be necessary to distinguish between a partial or complete replacement of a defective product. The warranty does not cover any items with multiple parts; the warranty will ONLY cover the individual component of the unit/item that may be defective. Replacement parts can be made available to a consumer through the original selling party, or an approved parts retailer. If this is not an option, contact our customer service department. Item is covered under a one-year limited warranty from the date of purchase. When requesting replacement parts due to a warranty claim after 30 days of purchase, credit card information will be requested for shipping charges.
Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to:
- Damages caused in Transit
- Inadequate care and/or neglect
- Environmental and/or natural elements
- Immersion in water, unless specified
- Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper installation, and/or modifications have occurred. This includes any and/or all defects arising out of freezing water damage, hard water damage, failure to keep the unit clean and free of harmful additives such as bleach, chlorine, etc…. which affect the paint and/or parts. This warranty also does not cover any additional charges or installation, removal, disposal, and/or shipping costs or consequential damage associated with any warranty claim.
Purchased your product online?
We would really appreciate it if you could share your experience with others by reviewing our product on the website from which you purchased it.
Have Questions or Issues? Need help with assembly? Contact us and we will resolve them within 12 hours.
- Support Hours: M-F 7:30–5:00 (U.S. Pacific Time)
- Call: 877-460-4511
- Email: info@alpine4u.com
FREQUENTLY ASKED QUESTIONS
What materials are used in the construction of the Alpine Corporation WIN794S Tabletop Fountain?
The Alpine Corporation WIN794S Tabletop Fountain is made from polystone and fiberglass.
What special feature does the Alpine Corporation WIN794S Tabletop Fountain include?
The fountain includes LED lights that illuminate the water flow.
What are the dimensions of the Alpine Corporation WIN794S Tabletop Fountain?
The dimensions are 10 inches in length, 7 inches in width, and 14 inches in height.
How much does the Alpine Corporation WIN794S Tabletop Fountain weigh?
It weighs 6.94 pounds.
What is the power source for the Alpine Corporation WIN794S Tabletop Fountain?
The fountain is powered by a corded electric connection.
What is the model number of the Alpine Corporation Tabletop Fountain?
The model number is WIN794S.
Who is the manufacturer of the Alpine Corporation WIN794S Tabletop Fountain?
The manufacturer is Alpine Corporation.
What is the price of the Alpine Corporation WIN794S Tabletop Fountain?
The price is $49.19.
How does the LED lighting enhance the Alpine Corporation WIN794S Tabletop Fountain?
The LED lights highlight the flowing water and create a soothing ambiance, enhancing the visual appeal of the fountain.
What type of maintenance is required for the Alpine Corporation WIN794S Tabletop Fountain?
Regular maintenance includes cleaning the fountain to prevent algae buildup, ensuring the water pump is functioning properly, and refilling the water as needed.
What are the benefits of having a tabletop fountain like the Alpine Corporation WIN794S in a room?
A tabletop fountain like the Alpine Corporation WIN794S can enhance the room's ambiance, provide soothing water sounds, act as a decorative piece, and improve the overall atmosphere by adding a touch of tranquility.
Why is the water flow in my Alpine Corporation WIN794S Tabletop Fountain weak or uneven?
Ensure that the pump is fully submerged in water and that there are no blockages in the tubing. Clean the pump and tubing to remove any debris that might be restricting the flow.
What should I do if my Alpine Corporation WIN794S Tabletop Fountain is making unusual noises?
This could be due to low water levels causing the pump to run dry. Add water to the fountain to ensure the pump is fully submerged. Also, check for any debris in the pump that might be causing noise.
How can I fix the issue if my Alpine Corporation WIN794S Tabletop Fountain is not turning on?
Check that the fountain is properly plugged into a working electrical outlet. Ensure that the power cord and plug are not damaged. If the problem persists, try resetting the outlet or using a different one.
Why is my Alpine Corporation WIN794S Tabletop Fountain leaking water?
Ensure that the fountain is placed on a level surface and that all connections are secure. Check for any cracks or damage in the fountain structure that might be causing leaks.
DOWNLOAD THE PDF LINK:Alpine Corporation WIN794S Tabletop Fountain Owner’s Manual
REFERENCE:Alpine Corporation WIN794S Tabletop Fountain Owner’s Manual- Device.Report