Alpine Corporation TIZ194BZ Water Fountain Owner’s Manual

: August 10, 2024
: Alpine CORPORATION

Table of Contents

Alpine Corporation TIZ194BZ Water Fountain
WHAT’s INCLUDED
FEATURES
SPECIFICATIONS
ASSEMBLING & USING YOUR PRODUCT
TROUBLES HOOTING
LIMITED WARRANTY INFORMATION
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Alpine Corporation TIZ194BZ Water Fountain

WHAT’s INCLUDED

Large Bucket
Small Bucket
Pump Body
Pump Handle
Lg Panel
Sm Panel
Tubing
Support
Pump
Small Screws
Large Screws
Self Tap Screws

FEATURES

SPECIFICATIONS

Power Requirements ………Standard Household 120V
Water Capacity ……………..1-1/3 US Gallons / 5 Liters
Tubing Diameter ……………………………………….½” I.D.

ASSEMBLING & USING YOUR PRODUCT

Unpack all components carefully. Please check to ensure all parts have been removed from the packaging. *Some splashing may occur when the product is in use.

Attach the Small Bucket to the Large Panel of the fountain base by attaching the two self-tapping screws through provided holes on the bottom of the Large Panel and mounting holes on the bottom of the Small Bucket
Remove the pump from its packaging and adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled.
Place the pump into the Large Bucket, and then place the Small Bucket with the attached Large Panel on top. The metal Support bar will rest under the Large Panel on top of the Large Bucket. This will be secured once the screws are tight. Use four of the Small Screws to secure the Large Panel to the large Bucket Note: Be sure the cord is routed through the cord slot.
Attach the pump Handle to the Pump Body by lining up the screw holes and securing a Large Screw.
Now attach the Pump Body to the Small Panel with the final two Large Screws and attach the Small Panel to the top of the Small Bucket with the last of the four Small Screws.
Next Install the Tubing into the fountain. The first one will connect from the bottom of the Pump Body to the bottom of the Small Bucket. The Second Tube will connect under the bottom of the Small Bucket to the actual Pump.
Gently pour water into the fountain basin, being careful not to overflow and cause splashing. Make sure the water completely submerges the pump and the water runs clear during operation.
NOTE: We recommend that you use distilled water to prevent scale build- up. The first time you operate the pump it can take up to 5 minutes for the air to be completely expelled and water begins to flow properly
Plug the pump your local power supply. Make sure that there is no water around the plug & always keep the power source in a dry place.
Congratulations, your fountain is now complete. Don’t forget to add water regularly as water will evaporate over time.

REPLACEMENT PART ITEM#

Power Head Pump ……………………P120

ALSO AVAILABLE FROM ALPINE

Fountain Care Formula ………………..PPL102
Foam and scale remover for indoor and outdoor fountains.
Americana® UV Acrylic Sealer ………RRR106
Provides protective clear coating for all painted surfaces.
Touch Up Paint Kit ….…………….…….RTD102
Includes primer, thinner, 7 paint colors, applicator and sealer.

TROUBLES HOOTING

If you have any questions and/or problems, please contact the retail store you purchased this fountain.

If your pump fails to run

Check the circuit breaker or try a different outlet to make sure the pump is receiving electrical power.
Check the pump discharge and tubing for any kinks and/or obstructions
Any buildup obstructing the water flow can be flushed with a garden hose
Check the rotor by removing the front cover & plate to access the impeller area. Turn the rotor and make sure that the rotor is not jammed or broken

If your pump “spews”

Check the water level to make sure the pump is completely submerged and there is enough water in the basin to operate your fountain. Not having enough water will cause your pump to spew

If your pump is making abnormally loud noises

Disconnect the pump from the electrical power supply and remove the front cover & plate
Carefully grip the impeller and gently pull the impeller/rotor assembly out of the pump housing
Rinse the impeller/rotor assembly and clean the cavity with clean water. If breakage or damage is found, contact your local retailer for parts.

CAUTION

Always unplug the pump from the electrical outlet before cleaning & handling
Use with clean water only, do not place the fountain and/or parts in any other liquid.
Periodically change the water & clean the pump to keep free from microorganisms
Disconnect and store the unit in a dry place if not in use for an extended period of time
Do not operate with water above 90°F or 30°C
Do not lift, carry, or pull the pump by the power cord
Do not exceed the maximum voltage & wattage on the transformer
NEVER LET THE PUMP RUN DRY

LIMITED WARRANTY INFORMATION

Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided. Photos of defective merchandise will also be required to help distinguish the actual cause of the defect. Please read below for a detailed description of warranty coverage.

Water Damage Alpine products are not manufactured to withstand extreme temperatures. Improper storage that allows water to freeze within a product may cause damage, is considered negligence, and will not be covered under this warranty. The use of “hard water,” and/or caustic cleaners, can affect the painted or other finishes. Failure to keep the unit clean, and use of such additives/cleaners, will also void the warranty. Please note: for fountains, it is normal for some splashing to occur, and protecting the immediate surfaces is not the responsibility of Alpine Corporation.
Paint & Color (Retention and/or Loss) The use of water will cause natural erosion to the color. This area can be touched up using standard paint. The paint is designed to protect the entire finish against the breakdown of color. As with any product, all finishes with time will gradually fade and discolor. The warranty will only cover against severe or complete fading, within the first year from date of purchase, with the above exclusion.
Procedure/Service Should a warranty/claim be needed, you should contact the retailer from whom you purchased the product. If that is not an option, you can contact Alpine Corporation at www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to show proof of purchase and provide photographs and any other information needed to validate your claim. This may be necessary to distinguish between a partial or complete replacement of a defective product. The warranty does not cover any items with multiple parts; the warranty will ONLY cover the individual component of the unit/item that may be defective. Replacement parts can be made available to a consumer through the original selling party, or an approved parts retailer. If this is not an option, contact our customer service department. Item is covered under a one-year limited warranty from the date of purchase. When requesting replacement parts due to a warranty claim after 30 days of purchase, credit card information will be requested for shipping charges.

Not Covered Under Warranty

The limited warranty will NOT cover cases of damages due to:

Damages caused in Transit
Inadequate care and/or neglect
Environmental and/or natural elements
Immersion in water, unless specified
Improper Installation/Storage and/or Maintenance

This warranty is void if the product has been damaged by accident, misuse, negligence, improper installation, and/or modifications have occurred. This includes any and/or all defects arising out of freezing water damage, hard water damage, failure to keep the unit clean and free of harmful additives such as bleach, chlorine, etc…. which affect the paint and/or parts. This warranty also does not cover any additional charges or installation, removal, disposal, and/or shipping costs or consequential damage associated with any warranty claim.

Purchased your product online?

We would really appreciate it if you could share your experience with others by reviewing our product on the website from which you purchased it.

Have Questions or Issues? Need help with assembly? Contact us and we will resolve them within 12 hours.

Support Hours: M-F 7:30–5:00 (U.S. Pacific Time)
Call: 877-460-4511
Email: info@alpine4u.com

FREQUENTLY ASKED QUESTIONS

What are the dimensions of the Alpine Corporation TIZ194BZ Water Fountain?

The Alpine Corporation TIZ194BZ Water Fountain measures 18 inches in length, 16 inches in width, and 27 inches in height, making it a substantial piece for outdoor or indoor use.

What makes the Alpine Corporation TIZ194BZ Water Fountain weather-resistant?

The TIZ194BZ model is designed with durable materials and finishes that can withstand various weather conditions, ensuring it remains functional and aesthetically pleasing outdoors.

How much does the Alpine Corporation TIZ194BZ Water Fountain weigh?

The fountain weighs 5.68 pounds, making it lightweight enough to move, yet sturdy enough to stay in place once positioned.

What power source is required for the Alpine Corporation TIZ194BZ Water Fountain?

The TIZ194BZ fountain is powered by a cord-connected power source, providing a reliable and continuous flow of water when plugged into an electrical outlet.

What is the price of the Alpine Corporation TIZ194BZ Water Fountain?

The Alpine Corporation TIZ194BZ Water Fountain is priced at $48.21, offering an affordable option for a decorative and functional water feature.

What materials are used in the construction of the Alpine Corporation TIZ194BZ Water Fountain?

The TIZ194BZ fountain is typically made from high-quality resin or similar durable materials, designed to withstand outdoor elements and provide long- lasting beauty.

How do you maintain the Alpine Corporation TIZ194BZ Water Fountain?

Maintenance includes regularly cleaning the fountain and pump, checking for debris, and refilling with water as needed. For outdoor use, it may also involve winterizing the fountain if exposed to freezing temperatures.

What are the benefits of using the Alpine Corporation TIZ194BZ Water Fountain in your garden or patio?

The TIZ194BZ fountain adds a tranquil water sound, enhances the visual appeal of your outdoor space, and serves as a focal point for relaxation and enjoyment.

How do you set up the Alpine Corporation TIZ194BZ Water Fountain?

Setup involves assembling the fountain parts, connecting the pump to the power source, filling the reservoir with water, and positioning the fountain on a flat, stable surface.

What is the voltage requirement for the Alpine Corporation TIZ194BZ Water Fountain?

The TIZ194BZ fountain typically operates on standard household voltage, which is usually 110-120 volts.

Who is the manufacturer of the Alpine Corporation TIZ194BZ Water Fountain?

The TIZ194BZ model is manufactured by Alpine Corporation, a well-known company specializing in high-quality decorative water features and garden products.

What should I do if the Alpine Corporation TIZ194BZ Water Fountain stops working?

Check if the fountain is properly connected to a power source and that the pump is fully submerged in water. If it still doesn't work, inspect the pump for clogs or damage. Cleaning the pump or replacing it may be necessary.

Why is the water flow in my Alpine Corporation TIZ194BZ Water Fountain reduced?

Reduced water flow can be due to a low water level, debris blocking the pump, or a kinked hose. Ensure the water reservoir is full, clean the pump, and straighten any kinks in the tubing.

What should I do if the Alpine Corporation TIZ194BZ Water Fountain is making loud noises?

Loud noises could be caused by the pump not being fully submerged, low water levels, or vibrations from the surface it’s on. Add more water to the reservoir, and ensure the fountain is level and stable to minimize vibrations.

What should I do if the lights on my Alpine Corporation TIZ194BZ Water Fountain are not functioning?

Check the light connections and ensure they are properly plugged into the power source. If the lights still don’t work, they may need to be replaced.