ABB S3C-A1, S3C-A2 Working Current Release Instructions
- August 15, 2024
- ABB
Table of Contents
Shunt trip
INSTALLATION AND
OPERATING INSTRUCTION
S3C-A1 2CDS200982R0001
S3C-A2 2CDS200982R0002
Shunt trip
1 wire 0.75 … 2.5 mm² /AWG 18-142 wires max. 2×1.5mm² /AWG 18-16 max. 2 wires per slot
Busbar PS pass-through TOP and BOTTOM **
Caution:** When using S3C-A1 and S3C-A2 with OTHER busbar types, make sure
that routing cable is not contacting with the pin of the busbar. Take into
account also high bending radius.
Caution: When positioning the device on the edge, it must be positioned
outside the busbar.
Protection against contact with the connection pins of the busbar must be
ensured through suitable selection of the busbar, device positioning and
covers.
Dimensional drawing
Contact us
ABB STOTZ-KONTAKT GmbH
Eppelheimer Str. 82
69123 Heidelberg
Germany
www.abb.com/lowvoltage
Warning! Installation by person with electro technical expertise only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>