TOPFLYtech TLD2-D OBDII GPS Vehicle GPS Tracker User Manual

TOPFLYtech TLD2-D OBDII GPS Vehicle GPS Tracker

Thanks for your purchase of the high-quality GPS tracker from TOPFLYtech. Please read this user manual carefully before installation and operation. Information in this manual is the property of TOPFLYtech. Changes to the specifications and features in this manual may be made by TOPFLYtech without prior notice. No part of this manual could be reproduced, copied, translated, transmitted, or published in any form or by any means without TOPFLYtech’s prior written permission. The tracker is using GNSS & LTE technologies and could collect device coordinates then transfer them via LTE network to the server. It provides customer with cost-effective, efficient and safety management. It has been widely used in commercial transportation, company vehicle fleet management, intelligent transportation, logistics, car rental, engineering machinery, marine transportation and other segments.

Product Specifications

LTE Specifications

Operating Band| LTE FDD Cat M1: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B 25/B26/B27/B28/B66/B85

LTE FDD Cat NB2: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B 25/B28/B66/B71/B85

GSM/EDGE: 850/900/1800/1900 MHz

Data Transmission| eMTC: Max. 588 (DL), Max. 1119 (UL)

NB1: Max. 32Kbps (DL), Max. 70Kbps (UL) NB2: Max. 127 (DL), Max. 158.5 (UL)

EDGE: Max. 296Kbps (DL), Max. 236.8Kbps (UL)

GPRS: Max. 107Kbps (DL), Max. 85.6Kbps (UL)

GNSS Specifications
GNSS Chipset| MediaTek High Gain GNSS receiver
Parallel GNSS| GPS+Glonass or GPS+Beidou
Receiver type:| 33 tracking / 99 acquisitions- channel GNSS

receiver

Sensitivity| Acquisition: -149 dBm

Tracking: -167 dBm

Reacquisition: -161 dBm

Horizontal Position Accuracy| Autonomous: < 2.5 m CEP
TTFF @ -130 dBm with (without) EASY™| Cold Start: < 15s (32s)

Warm Start: < 8s (28s) Hot Start: < 1s (1s)

Interfaces
OBDII Connector| Support legislated OBDII protocols: ISO 9141-2/ISO 14230-4/ISO 15765-4

SAE J1939 (Heavy Vehicle)

General Specifications
Dimensions| 63mm47mm20mm (2.48” 1.85” 0.79”)
Weight| 48g (1.7oz)
Backup Battery| Li-Polymer 200 mAh/ 3.7V
Operating Voltage| 7V to 32V DC
Operating Temperature| -30℃ ~ +80℃ (-22°F ~ 176°F)
Storage Temperature| -40℃ ~ +85℃ (-40°F ~ 185°F)
Air Interface Protocol
Transmit Protocol| TCP, UDP, MQTT, SMS
Data Security & Encryption Option| MD5/ AES256
BLE Accessory Support| Yes
OBDII Data Reading| Yes
Diagnostic Trouble Code (DTC)| Read and Erase
Scheduled Timing/angle/distance Report| Report position and status at preset intervals
External Power Status Alarm| Report when external power is disconnected
Low Power Alarm| Report when backup battery is low
Network Signal Jamming Detection| Report network jamming
Driving Behavior Monitoring| Aggressive driving behavior detection, e.g.,

harsh braking and acceleration

Crash Detection| Accident data collection for reconstruction and

analysis

Data Roaming Control| Avoid additional data consumption

LED indicator

Note: Indicator lights will go out automatically after the tracker turns on for 8 minutes.

Installation Guide

•  SIM Card Pre-Installation Note

• SIM card data service should be enabled.

• If the SIM card is locked via PIN, please unlock it first. Ensure there is sufficient balance/data in the SIM card.

•  SIM Card Installation

• Follow the SIM icon direction then insert the SIM card Give a slight push then release.

• Installation

• This is a plug-and-play tracker. Before the installation, please ensure your vehicle have a OBDII connector.
  After plugged the tracker into the car OBDII connector, it will automatically power on and the LED indicators will start to flash. This indicates a successful installation. Please ensure the tracker is firmly connected to the car OBDII connector.

• Ignition Detection and OBDII Data Reading

• The tracker detects ignition status and reads OBDII data automatically.

Tracker Configuration
Refer to frequently used operation commands in this manual
Tracker Operation
Power on and off

Power on: Insert a SIM card and connect the tracker to external power. It will turn on automatically.
Power off: Remove the SIM card first, then disconnect the tracker from external power. It will power off automatically around 5~10 seconds.

Location Search

SMS Query
Send a location inquiry SMS command (refer to the Operation Command in this manual) to the tracker. The location information will be sent to you through SMS. Platform QueryConnect your tracker to the tracking platform then check the real-time position online. (Additional tracking service charge may happen. Contact with your service provider to get more details.)

Quick Trouble Shooting

Unable to Connect to the Tracking Platform  Check the APN and IP settings. Check the SIM card whether support specific network and the data service whether is enabled.Make sure there is no limitation or already added server IP to the IP white list when using a M2M SIM card.Check the remaining balance or data of the SIM card.

Tracker Shows Offline

Check the external power voltage to see whether the tracker is disconnected from external power.Check if the vehicle entered network blind area.Check the balance or data of SIM card.If the connection lost happens on the last several days of the month, check whether the data service is terminated by carrier due to reaching the data cap.

Unable to locate
Is the device shielded by metallic stuff?Does the vehicle enter an area with no satellite coverage?

Location Drift
In an area with poor GNSS signal (like the areas with lots of high buildings), location drift may happen. When move to open area, the drift will no longer exists.

No Command Reply
Check the command format. Make sure it’s correct. The vehicle may be in- network blind area. Ensure the SIM card is properly inserted.

Warranty and Stock
The standard warranty period is 12 months starting from the date of purchasing. If the tracker will be stored for a long time, please connect it to the external power and recharge the internal battery (10 hours) every 3 months. It will be helpful to the internal battery life.
Frequently Used Operation Commands (SMS)
Commands are not case-sensitive and can be sent via mobile phone or Web. The content is separated by comma and ends with #. When set successfully, the tracker will return OK and execute it. Otherwise, there is no message returned.

APN Setting

| APN, Current PIN , APN Name , User Name,Password #

Server Setting

| IP, Current PIN , Server Domain Name or IP , Port Number #

Reporting Interval Setting

| TIMER, Current PIN , Upload Time(ACC on) : Upload Time(ACC

off) : Angle Compensation : Distance Compensation #

Heartbeat Setting

| HBT, Current PIN , Heartbeat Interval #
PIN Setting| PASSWORD, Current PIN , New PIN #
---|---

Towing Setting

| DRAG, Current PIN , Distance #

Speeding Setting

| SPEED, Current PIN , Upper Speed Limit #

Position Inquiry

| GOOGLE, Current PIN #

Forgot the PIN

|

MYSELF#

APN Setting
APN,Current PIN,APN Name,Username,Password#

Note:1) Tracker will return “SET APN OK” when received this command.
If there is no GPRS User Name and APN PIN, the SMS setting is: APN,Current PIN,APN Name,,#
If there is no APN PIN, the SMS setting is: APN, Current PIN, APN Name, Username,#

Server Setting

IP,Current PIN,Server Domain Name or IP,Port Number#

Server Domain Name or IP:
Range: Letters, Numerals and Symbols
Length Limit: 1~128

Port Number:
Range: Positive Integer
Length Limit: 0~65535
Note: Tracker will return “SET IP OK” when received this command.

Reporting Interval Setting

TIMER ,Current PIN,Upload Time(ACC on):Upload Time(ACC off):Angle Compensation: Distance Compensation#
Upload Time (ACC on):
Range: Positive Integer :Range Limit: 0, 3~65535 :Default: 25
Upload Time (ACC off):
Range: Positive Integer :Range Limit: 0, 3~65535 :Default: 600
Angle Compensation:
Range: Positive Integer :Range Limit: 0~90 degrees:Default: 30 degrees
Distance Compensation:
Range: Positive Integer:Range Limit: 0 ~ 65535 meters:Default: 0 meters
Note: Tracker will return “SET TIMER OK” when received this command.

Heartbeat Setting

HBT,Current PIN,Heartbeat Interval#
Heartbeat Interval:
Range: Positive Integer:Range Limit: 1 ~ 255 minutes
Default: 5 minutes
Note: Tracker will return “SET HBT OK” when receiving this command.

PIN Setting

PASSWORD , Current PIN,New PIN#
PIN:
Range: Letters and Numerals::Length Limit: 1 ~ 10:Default: 0000
Note: Tracker will return “SET PASSWORD OK” when receiving this command.

Towing Setting

DRAG, Current PIN, Distance#
Distance:
Range: Positive Integer Range limit: 0~65535 meters Default: 0
Note: Tracker will return “SET DRAG OK” when receiving this command. This function will be enabled automatically when ACC is off.  The Recommended distance setting is no less than 100 meters.

Speeding Setting

SPEED, Current PIN,Upper Speed Limit#
Upper-Speed Limit (KM/H): Range: Positive Integer:Range limit: 0~32767
Range limit: 0~32767
Default: 0
Note: Tracker will return “SET SPEED OK” when receiving this command. Set “Upper-Speed Limit” to 0 will turn off the speed alarm.

Position Inquiry

GOOGLE, Current PIN#
Note: Tracker will return below SMS message when received this command. http://maps.google.com/maps?q=,

Forgot the PIN MYSELF#

Note: If the manager’s phone number has been set, only the manager can use “MYSELF#”. If no manager setting, the tracker will return the IMEI and current PIN when it received “MYSELF#” from any mobile phone.
This command can be used to retrieve passwords.

Optional Accessories List

FOTA Notification
TOPFLYtech is committed to providing clients with the best user experience. We are offering automatic firmware update feature for every device. This feature allows devices always having the latest version firmware. It can save clients the time and effort of updating firmware manually. Please note that this feature is enabled in default. If you want to turn it off, please contact with TOPFLYtech. If this feature is disabled, the fw update only can be done by sending upgrade command manually

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IMPORTANT NOTICE:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>