breo iNeck2 Neck Massager User Manual

June 5, 2024
Breo

breo iNeck2 Neck Massager User Manual

breo iNeck2 Neck Massager.webp

Thank you for purchasing Breo iNeck2
Please read this manual carefully before using and keep it properly for Mure reference.

Inside the Package

Your massager comes with a Master Unit, Power Charger, User Manual, Portable Bag.

FIG 1 Inside the Package.JPG

Function Deployment

FIG 2 Function Deployment.JPG

  1. drawstring width knob
  2. LED indicator
  3. function Operating Buttons ( including LCD display, mode selection key, On/Off key)
  4. Power charging jack
  5. Remove the chain with key
  6. two infrared lamps

Preparation

Preparation

  1. Insert the plug of power charger into power charging jack.
  2. The indicator of power an the LCD screen flashes during charging the flash stops when fully charged.
  3. In the process of charging, the product does not support operating (if the product is charged while operating, it will start the self-protection program and stop operating automatically)
  4. Charging time is 5–6 hours.

Wear
Pull belt into belt hole, please use nails on massage head width adjustment knobs concave, button out V half arc, put on the main unit to adjust drawstring width knob till a desired position got. please aim the main unit right at neck, hold drawstring with two hands,

Power on
If to short press Power On/Off key. the product starts working, and LED indicator lights in red. The default time is 15 minute, and the default massage mode is mode 1. To change massage mode, please operate mode repeat key, and the corresponding massage mode shall be displayed on LED display.

Manual mode
Mode selection: four massage modes: if to short press mode selection key, massage mode will be change in tum.
Mode 1 one group of massage head runs forward and one group of massage head runs reversely;

Mode 2 one group of massage head runs IIIV9rsely and one group of massage head runs forward;

Mode 3 two groups of message head run forward (with infrared magnetotherapy function);
Mode 4 two groups of massage head run reversely (wi1h infrared magne1otherapy function) ;

Operation

Massage strength adjustment
Intellectual adjustment of massage strength: when the massage head touches articles, massage strength will automatically increase; when the massage head fails to touch articles, massage speed will automatically decrease.

FIG 3 Massage strength adjustment.JPG

Power-off
If to long press Power On/Off key, the products shall stop running, and LED turns off. (When fixed time is up, the product will automatically turn off).

If to short press Power On/Off key, running time will switch to 5min, 10 min and 15min. which will show on LCD screen.

Precautions

Please do read this User’s Manual carefully for correct and safe use of this massager

  • Do not use the neck massager while driving.

  • Do not use the massager at the place with excessive y high temperature and moisture

  • People suffering from swelling, inflammation or blood stasis in the neck, or have had
    neck surgery shouldn’t use the massager.

  • Patients with apoplexy, high blood pressure and hypoglycemosis are prohibited to use
    the product.

  • Those slow in action, discomfort in body and mind or the mental y handicapped are
    prohibited using this product

  • Please avoid using this neck massager after drinking and when body unwell

  • This massager is designed for household health care, and does not app y to the diagnosis, treatment and other commercial uses.

  • Please wipe the massager with sterile cotton moistened with neutral detergent Do not
    clean it with water. Switch off the device before cleaning

  • The massager has hot compress function, users insensitive with temperature sensing should be careful in use

  • Noise during massage is normal

  • The massager is intellectual y controlled. In case of over large of strength, it starts machine protection mechanism, and it is normal to stop running

  • Check the power supply and do not switch on the device if the voltage exceeds the rated range of the device.

Troubleshooting & Technical Parameters

If there is any problem when you use the device, please follow the instructions below to check. If the problem still exists or the device can’t work normally, please turn off the power supply and contact local service center. Do not disassemble or repair the device yourself.

FIG 4 Troubleshooting & Technical Parameters.JPG

Storage & Transportation

Storage
In case the storage period exceeds 3 months, please check it and power it on for ha f an
hour. Do not store close to floor, wall or roof. Do not put heary objects on the device Keep
good ventilation condition and away from direct sunshine and corrosive gases

Transportation
The product has simple shockproof design and can be transported by air, railway, highway
or ship; avoid rain, snow, impact, and always keep the right side up

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals