SENCOR SEP 530BT WH Wireless Earpods With Microphone User Manual

June 13, 2024
SENCOR

SENCOR SEP 530BT WH Wireless Earpods With Microphone

SENCOR-SEP-530BT-WH-Wireless-Earpods-With-Microphone-
PRO

Supply content

  • “L” and “R” earphone
  • Charging case
  • User’s manual
  • USB-C charging cable

SEP 530 BT Bluetooth earphones description

SENCOR-SEP-530BT-WH-Wireless-Earpods-With-Microphone-1

  1. Earphone touchpad
  2. Microphone and earphone LED indicator
  3. Charging contacts
  4. Charging case LED indicator
  5. USB-C charging connector
    • R: Right earphone
    • L: Left earphone

Left and right earphone function

  • 1 x short touch during an incoming call – answer the call
  • 1 x long touch (2 seconds) during an incoming call – call rejection
  • 1 x short touch during an ongoing call – end call
  • 1 x short touch – play function
  • 1 x short touch – pause function

Left earphone

  • Long touch – turn off/on the earphone
  • Long touch in music mode – volume down
  • 2 x short touch – previous track
  • 3 x short touch – launch SI RI/Google assistant

Right earphone

  • Long touch – turn off/on the earphone
  • Long touch in music mode – volume up
  • 2 x short touch – next track
  • 3 x short touch – change Game mode / Music mode

Putting into operation

Before first use, be sure to read the safety instructions contained in this user’s manual carefully.
Before using it for the first time, remove the protective film of the charging con­tacts on the bottom of the earphones and return them to the charging case. Start charging the charging case and the earphones to the maximum level. Taking the earphones out of the case will automatically switch them on.

When the earphones are in the off state outside the charging case, press and hold the touchpad on each earphone and wait for the earphones to turn on. The earphones are already paired from the fact□rLl and do not need to be paired with each other. (If pairing to TWS mode fails, return the earphones to the charging case and repeat the above instructions).
Notice: To prevent damage to LlOUr’s hearing, before connecting the BT head­phones to Llour’s mobile phone, make sure that Llour device’s volume level is always set to a minimum.
Keep the touchpad clean and avoid touching other objects or body parts such as hair.
Note: If the BT earphones are not paired with a device, they will turn off when left idle for a long time. Put them in the case.

Pairing your earphones via Bluetooth

To pair the BT earphones with your mobile device, do the following Remove the earphones from the charging case (blue and red intermittent left earphone indication) and look for the Bluetooth earphone name “SEP 53OBT” in the device YOU want to pair and start the pairing process. AlwaLlS performs the pairing process when both earphones are removed from the charging case.
If yOU are requested to enter a pairing code while your device and the BT headphones are painting, use the following code “0000”.
To cancel the pairing process, disconnect the BT earphones from your mo­bile device (cancel the Bluetooth pairing).
Note: To ensure a stable Bluetooth connection, make sure that the distance between the BT headphones and LlOUr paired device is kept within 10 me­ters. Depending on the surrounding interference, it is sometimes necessary to keep a shorter distance between the BT headphones and YOUR paired device.

Charging

A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels.
When the BT earphones are placed in the charging case, the LED indicator of the case shows:

  • a. The blue solid indication of the charging case and the red solid indication of the earphones indicate that the earphones are charging.
  • b. When the USB-C charging cable is connected, the intermittent red indication shows the charging of the charging case.
  • c. Discharged charging case is indicated by an intermittent blue indi­cation – connect the charging cable.

Attention: For charging, use only the original accessories supplied with the appliance. To achieve maximum battery life, it is advisable to start charging the battery only when the battery is low (10% – 20%). Charge continuously until fully charged.
Recommendation: If your earphones are not to be used for an extended period of time, we recommend to fully charging the batteries once every two to three months. We recommend storing the BT head­phones and the charging box with the battery charged to prevent irreparable damage to the battery (loss of capacity).

Specification

  • Bluetooth version: Bluetooth 5.1
  • Transfer distance: 10m
  • Charging time: 1.5 hour
  • Charger box charging times: 3 times
  • Music time: About 5 hours 60% volume
  • Battery capacity: 25mAh each earbud, charger box 230mAh
  • Control: Touch control
  • Impandence: 320‡15%
  • Driver: @13mm dynamic
  • Frequency: 20Hz~20KHz
  • Sensitivity: 102 ‡ 30B
  • Power rate: 5mW each earbud
  • Material: ABS
  • Maximum transmitter power at 2.4 GHz – 2.4835 GHz: max 100mW

Safety Notice

  • Please observe the rules of the Country or Region which you are in while driving.
  • Do not disassemble or modify the headset at any reason, otherwise, It may damage or burn the headset.
  • If there is any quality problem, please send headset to an authorized service center for repairing.
  • Please keep the equipment along with all the accessories out of the reach of children and pets.
  • Extreme temperatures will cause the device deformation, reduce the charging capacity and shorten the working life.
  • Please do not immerse the earphone into water. Guarantee will be lost if damage is caused by immersion into water.
  • It will damage your hearing if you listen with high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music.

Instructions and information regarding the disposal of used packaging

materials

Dispose of packaging material at a public waste disposal site.

Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help prevent the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller. This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety. Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes. Hereby, FAST ¢R, a.s. declares that the radio equipment type SEP 530 BT is in com- pliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sencor.eu

Manufacturer: FAST CR, a.s.
U Sanitasu 1621
25101 Ricany
Czech Republic

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals