HIDBEA VC-TJ30-60200-65 Adhesive Sun Blocking Privacy Window Film User Manual
- June 5, 2024
- HIDBEA
Table of Contents
HIDBEA VC-TJ30-60200-65 Adhesive Sun Blocking Privacy Window Film
Do You Want To Be Seen Right Through Your Windows?
To apply this adhesive privacy window film successfully, please follow tips below:
- Thoroughly clean the windows.
- Remove the backing protective film from the green label.
- When you squeegee out all bubbles, please use the cloth as a cushion between the squeegee and the film to avoid making scratches.
- Application is easier with two people, especially on larger windows (3-4 feet wide).
- Apply film to cool shaded windows when glass temperature is between 45-90℉. For best results, do not apply in direct sunlight or freezing weather.
- The best time for installing is early morning or evening when the glass is cooler.
- Cut the film to a size of 2-3mm from the window frame, pick up a corner at the edge, re-spray and paste, and scrape the bubble.
IMPORTANCE:
- Do not apply any film to frosted, treated, etched, stained glass, or any otherwise flawed or defective glass.
- Do not apply the film to motor vehicle windows.
- Handle the film carefully while installing to avoid wrinkles or creases, which can’t be removed.
- Make sure you have removed the transparent backing film and paste the smooth side to the window, or it will not cling.
- Do not affix tapes, suction cups, stickers, etc. to the film surface. Doing so will reduce the low impassivity properties of the film and will void your product warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>