ZHICHUANG Sanag S5S EWS Bluetooth Headset User Guide
- August 13, 2024
- zhichuang
Table of Contents
ZHICHUANG Sanag S5S EWS Bluetooth Headset
Product Overview
- Headphone indicator
- Touch key
- Pilot lamp
Power button
- Manual power on Manually press and hold the earphone touch button for 3S, and the ice blue light flashes quickly.
- Manual shutdown: Long press the earphone touch button for 7S to manually shut down, and the ice blue light will flash three times quickly.
- On/off : Take out the headset and turn it on automatically, put it into the charging bin and shut it off automatically, take out the unconnected mobile phone for more than 5 minutes, and shut it off automatically.
Wear
Remove the earphones and place them In the middle of the ear Put in the headset and finish wearing
Game mode/Music mode
- Play/Pause: Click
- Previous: Double-click on the left ear
- Next: Double click on the right ear
- Volume reduction: Right ear 3 hits
- Volume increase: left ear 3 hits
Call
- Call out : Cancel by double-clicking on the left/right ear
- Answer a call : Click on the left or right ear
- Hang up : Double-click on the left/right ear
- To reject the call : Long press the left/right ear for 2S
Voice Assistant
Long press 35 with left/right ear (dick Exit] Wake up the voice assistant
Bluetooth operation
Bluetooth connection successful
- The headset enters Bluetooth mode, search the Bluetooth pairing name “sanag S5S /sanag S5S Al ” on the mobile phone, click Connect, and the blue light will turn off.
- A Bluetooth device has been connected. After the device is turned on, the left and right earphones automatically connect back, and the host automatically connects back to the last connected device.
Bluetooth disconnect
- Manually turn off the Bluetooth of the mobile phone, and the headset enters Bluetooth pairing mode.
- Disconnect the headset from the mobile phone after over distance, return to the effective distance range, can connect the mobile phone normally, more than 5 minutes will automatically shut down.
- Earphone charging: Put in the charging compartment, and the ice blue light is on. When the headset is fully charged, the charging bay light turns off.
- Charging bin : when charging, the ice blue light flashes and the ice blue light is always on.
- Abnormal reset and restart: when the phone is not connected, press the left and right ear touch keys at any time, and the earphone will be automatically turned on after being turned off, and the earphone will be restored to factory Settings.
- Clear pairing: 1. Click eight times to clear pairing information (clear pairing information, turn off low latency). 2. After the pair is cleared, the white indicator is displayed once and restart.
Product Parameter
- Name : EWS Bluetooth headset
- Model : sanag S5S / sanag S5S A
- Bluetooth Version: V5.3
- Connection range : ≥10m
- Headphone Battery Capacity : 50mAh
- Battery Capacity Of Charging Bay : 400mAh
- Charging voltage: 5V 1A MAX
- Playback time : about 5H
Matters need attention
- Do not use abrasive cleaning agents to clean this product.
- Do not allow this product to be heated or near fire sources, such as cooking stoves.
- Do not allow this product to be exposed to direct sunlight for a long time.
- Do not dispose of this product in the fire to avoid explosion.
- Do not attempt to disassemble this product for any modification, as it does not contain any repair components.
- Do not use this product in the rain. If you do not intend to use this product for a long time, please store it in a dry environment and Charge your headphones at least once to extend life and avoid extreme temperatures and dust.
EWS BLUETOOTH HEADSET
sang S5S/ sang S5S
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>