zhichuang C5 Motorcycle Driving Recorder User Manual
- June 16, 2024
- zhichuang
Table of Contents
zhichuang C5 Motorcycle Driving Recorder
Dear users:
shalom! Thank you very much for choosing our series of products! To ensure
your better use of this product, read this manual before use. In order to
avoid you in the process of using the product, please try to use the original
parts! Due to the different production date and batch, the manual and the
actual product may be slightly different, the specific use, please refer to
the physical object!
major function
- During driving, the front and back pictures and sound of the recorder are recorded
- Sudden power failure, Micro memory card removal and other abnormalities, the current video can be fully recorded.
- Allowable input operating voltage range: DC 5V~12V.
- Allowable input operating voltage range: DC 5V~12V.
Product installation instructions
Tips: For safe installation, please install on the motorcycle after the motorcycle turns off the engine.
- It is recommended to put it in the storage box (as shown) and installed it around the vehicle dashboard (shown)
- Connect the power cord to one of the motorcycle headlights, keys and battery.
- 【Note 1】Adjust the lens position to ensure that the lens is in level with the ground；
- 【Note 2】Note the lens to adjust the screen on the display screen to appear normally；
Key operation instructions
Common problem description
1： machine can’t turn on?
- A、the dielectric surface of the power source;
- B、please confirm whether the power supply of the motor vehicle is normal.
- C、take out the TF card and confirm if it is TF.
2. Can not be displayed on your head?
- A、verify that the product is working properly;
- B、check whether the interface of the image head is connected;
- C、take out the TF card and confirm if it is TF.
Three, do you think you’re going up and down?
- A、poor interface contact;
- B、the fixed support.
4, during the process of recording the screen suddenly turned off the backlight is what?
- A、set screen (b) Time-preserving or dormant;
- B、screensaver can wake up via a power key.
5, the recorded document on the computer to play the card or ink?
- A、replacement of audio and video playback software for playback; The speed of B、card is too low. It is recommended to use TF card above C10 speed.
Description of exemption
The audio and video information provided by this product is for reference
only; the video records are kept by the customers themselves; the company will
not be legally liable for the audio and video records information provided by
the product!
WiFi version
- Scan the QR code below, Install APP“failure”&“Broadcom”It is recommended to use“failure”）
- User name ：DVR_***
- Password：12345678
The app can be downloaded and installed by mobile phone/vehicle and can be connected with the recorder.
Note:
Some setting functions in app cannot be used.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.