Zhichuang C16S True Wireless Stereo Bluetooth Headset User Guide
- August 7, 2024
- zhichuang
Table of Contents
Zhichuang C16S True Wireless Stereo Bluetooth Headset
Product Specifications
- Compliance: Part 15 of FCC Rules
- RF Exposure: Meets general RF exposure requirement
- Usage: Portable exposure condition without restriction
Product Usage Instructions
FCC Compliance
This device complies with part 15 of the FCC Rules. To ensure proper operation, please adhere to the following conditions:
- Do not cause harmful interference.
- Accept any interference received, including undesired operation.
RF Exposure
The device has been evaluated to meet general RF exposure requirements. You can use the device in portable exposure conditions without any restrictions.
Frequently Asked Questions
Q: What should I do if the device causes interference?
A: If the device causes interference, try relocating it to a different location. Ensure it is not placed near other electronic devices that may be causing interference.
Q: Can I use the device in all portable exposure conditions?
A: Yes, the device can be used in portable exposure conditions without any restrictions as it meets general RF exposure requirements.
product overview
Key function operation
- Power on: 1. Open the charging compartment, take out the earphone and turn it on automatically, the ice blue light flashes quickly, the auxiliary ear is turned off after connection, and the main ear light flashes slowly; 2. Hold down the MFB key for 3S to start the system manually.
- Shutdown: 1. Put the earphones into the charging bin and shut it off automatically. 2. Hold down the MFB touch button for about 7 seconds. The ice blue light flashes for 3 times and then turns off.
- Pairing: After the headset is turned on, it automatically enters the pairing state (waiting tobe connected with the mobile phone), and the ice blue light of the main ear flashes slowly.
- Answer: When a call comes in, click the MFB touch key of the left and right ears.
- Hang up: During the call, double-click the MFB touch button of the left and right ears.
- Reject: When a call comes in, press the MFB touch key for 2 seconds.
- Play/Pause: Click the left and right ear MFB touch keys.
- Previous: Double-click MFB touch button on left ear.
- Next: Double click MFB touch button on right ear.
- Volume plus: Hit left ear MFB touch key three times.
- Volume reduction: hit the right ear MFB touch key three times.
- Voice Assistant: Press and hold the ear MFB touch button for about 3 seconds to release the voice assistant and click to exit.
- Reset headset: When the phone is not connected, press the MFB button of the left and right ears at any time to reset the headset factory Settings, and the ice blue light will turn off automatically after 2 seconds of successful reset.
- Game Mode/Music mode: Hit the MFB button of the left and right ears 4 times to enter the low latency mode, and then switch to the music mode 4 times.
- Low power alarm: When the headset battery is insufficient, it will prompt a low power alarm tone every 3 minutes.
- Charging: Put the headset into the charging bin, charge the headset in the bin, and the ice blue light is on. The ice blue light in earphone charging is steady on, the full light is off, and the charging bay light is off. Charge the charging bin, charging bin ice blue light flashing, full of ice blue light on.
Bluetooth operation
- Bluetooth connection is successful:
- The headset enters Bluetooth mode, and the phone searches for the Bluetooth pairing name “sanag C16S”.Click on the connection.
- The headset connects to the device once by default.
- Bluetooth disconnected:
- Manually turn off the Bluetooth of the mobile phone, and the headset enters Bluetooth pairing mode.
- Disconnect the headset from the phone after over distance, return to the effective distance range within 5 minutes, and connect the phone normally. After 5 minutes, it will automatically shut down.
Specifications
- Name: OWS Bluetooth headset
- Model: sang C165
- Bluetooth Version: V5.3
- Connection range: ≥10m
- Headphone Battery Capacity: 50mAh
- Battery Capacity Of Charging Bay: 500mAh
- Charging voltage: 5V 1A MAX
Matters needing attention
- Do not use abrasive cleaners to clean this product.
- Do not allow this product to be heated or close to a fire source, such as a cooking stove.
- Do not expose the product to direct sunlight for a long time.
- Do not discard this product in fire to avoid an explosion.
- Do not attempt to disassemble this product to make any modifications, as it does not contain any maintenance components.
- Do not use this product in rain.
- If you do not plan to use this product for a long time, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.