DBK PSA06 ABS Sensor Protection Installation Guide
- August 12, 2024
- DBK
Table of Contents
DBK PSA06 ABS Sensor Protection
Product Information
- Product Name: Instruction kit/installation kit – ABS Sensor Protection/ABS Sensor Protection
- Product Code: PSA06
- Manufacturer: DBK
- Origin: Made in Italy
Specifications
- 1 x PSA01-C
- 2 x Screw TCE M6x25
- 1 x DIST64D
- Threadlocker for high-strength
- Torque: 7.5Nm
Product Usage Instructions
- Ensure the vehicle is safely lifted and secured.
- Locate the ABS sensor that requires protection.
- Use the provided tools to carefully install the ABS sensor protection kit according to the installation manual.
- Tighten the screws to a torque of 7.5 Nm using a torque wrench.
- Double-check the installation to ensure proper fitting and alignment.
Frequently Asked Questions
-
Q: Can I install the ABS sensor protection kit myself?
A: DBK recommends having the installation done by a specialized mechanic to ensure proper installation and functionality. -
Q: What is the torque specification for tightening the screws?
A: The recommended torque for tightening the screws is 7.5 Nm to secure the ABS sensor protection kit in place effectively.
Parts List
- PSA01-C 1
- Vite/screw TCE M6x25 1
- DIST64D 1
Tools
High strength
Terms of use, necessary precautions, and disclaimer
- All DBK products made and/or sold, dealing with the purchase Agreement, are designed and meant to be used only on private roads closed to public traffic or for racing use in closed tracks, they are not therefore provided with homologation.
- Customers buying the above-mentioned products, who intend to use them on a public street, must require in advance the homologation (or an updated registration) to their country’s competent authority, otherwise, they acknowledge to be in breach of the law of the country in which they are using the above-mentioned products and, consequently, they take charge of the liability arising from the inappropriate use, thereon, the vendor takes no responsibility in case of fine, penalty or damage which may occur to the customer and user.
Installation And Mounting
Read and follow these instructions carefully, an essential part of the product. We recommend that the installation and mounting of the parts be done by qualified mechanics or specialized mechanical stores. The company takes no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation. For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.
Cleaning and service
- All DBK products require regular inspection and maintenance. The greater their use, the greater the frequency of checks must be. If you find any parts missing, damaged, worn, or with an irregular appearance, immediately consult your DBK dealer before using the motorcycle. In any case, never try to repair or modify DBK products or their parts, or replace them with original DBK components. DBK products may not be compatible with your motorcycle.
- Do not use chemical products such as alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.